BMW K75 S | Replacing Vacuum Line to See if That Cures hesitation in Acceleration

Kintsugi Moto
Kintsugi Moto
597 بار بازدید - 2 سال پیش - I noticed that this 1988
I noticed that this 1988 BMW K75 S would hesitate under hard acceleration during the middle RPM range around 3-4500. It pulls strongly from idle up to 3k, and the above 5k, the bike would accelerate quickly all the way to redline. I didn't replace the vacuum lines when replacing the fuel lines, so going back to see if changing to new vacuum lines will help eliminate the flat spot.

===========================
Merchandise
===========================
▶ Comprehensive Vehicle Maintenance Log Book: https://amzn.to/3wc2EMl
===========================
Social Media Links:
===========================
▶ Facebook: Facebook: kintsugimoto
▶ Instagram: Instagram: kintsugimoto
▶ Email List:  https://kintsugimoto.ck.page/47f50ba6fa
===========================
TIMESTAMPS
===========================
00:00 Introduction
00:30 BMW K75 S removing airbox to get access to the fuel regulator
01:09 BMW K75 S installing vacuum line to the fuel regulator
02:20 BMW K75 S reinstalling airbox
02:30 BMW K75 S checking vacuum caps on each intake
03:15 BMW K75 S check ride to see if the flat spot between 3-4500 RPMs

#bmwk75 #classicmotorcycles #wrenching
2 سال پیش در تاریخ 1401/08/05 منتشر شده است.
597 بـار بازدید شده
... بیشتر