Chucking Wood or How to Hold Wood on the Lathe
7.3 هزار بار بازدید -
3 سال پیش
-
I demonstrate various ways for
I demonstrate various ways for chucking wood or how to hold wood on the lathe in this Interactive Remote Meeting demonstration with the Central Virginia Woodturners June 15, 2021. Chapter links are below.
00:00 Introduction
2:08 Drive centers
6:50 Marking centers
10:00 Mounting work between centers
35:48 Faceplates
40:17 Faceplate rings for scroll chucks
41:50 Threaded DIY glue blocks
45:52 Turners double sided tape
48:45 DIY screw chuck
52:00 Jam chucks for bowls, boxes and more
59:20 Collet chucks
1:13:00 Scroll chuck inserts vs spindle adapters vs direct threaded
1:20:00 Scroll chuck features and comparisons
1:46:20 Woodworm screw
1:51:25 Dealing with stuck chucks
1:54:40 The lathe as a horizontal boring machine
1:56:30 Compression chuck
1:57:00 Reversing a bowl to finish the bottom
2:02:30 Vacuum chuck
As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeace...
Beal 1 1/4 Collet Chuck https://amzn.to/3n7QgFz
https://amzn.to/3omI6Zp
NOVA 48232 G3 Reversible Wood Turning Chuck (Dedicated to fit 1" x 8tpi lathe spindles only) https://amzn.to/3naxNs9
Dew Rags/skull caps https://amzn.to/3D3J6Y9
NOVA 5015 Live Center System with Stepped Cone https://amzn.to/3FPYUjo
Cone Center https://amzn.to/3AM6wzZ
Robert Sorby Steb Center https://amzn.to/3aJdBGE
PSI Woodworking LCENTSS21 #2 MT with 5/8-Inch Crown Super Wood Lathe Drive Center https://amzn.to/3aJo45c
You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website https://www.mikepeacewoodturning.com/
00:00 Introduction
2:08 Drive centers
6:50 Marking centers
10:00 Mounting work between centers
35:48 Faceplates
40:17 Faceplate rings for scroll chucks
41:50 Threaded DIY glue blocks
45:52 Turners double sided tape
48:45 DIY screw chuck
52:00 Jam chucks for bowls, boxes and more
59:20 Collet chucks
1:13:00 Scroll chuck inserts vs spindle adapters vs direct threaded
1:20:00 Scroll chuck features and comparisons
1:46:20 Woodworm screw
1:51:25 Dealing with stuck chucks
1:54:40 The lathe as a horizontal boring machine
1:56:30 Compression chuck
1:57:00 Reversing a bowl to finish the bottom
2:02:30 Vacuum chuck
As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeace...
Beal 1 1/4 Collet Chuck https://amzn.to/3n7QgFz
https://amzn.to/3omI6Zp
NOVA 48232 G3 Reversible Wood Turning Chuck (Dedicated to fit 1" x 8tpi lathe spindles only) https://amzn.to/3naxNs9
Dew Rags/skull caps https://amzn.to/3D3J6Y9
NOVA 5015 Live Center System with Stepped Cone https://amzn.to/3FPYUjo
Cone Center https://amzn.to/3AM6wzZ
Robert Sorby Steb Center https://amzn.to/3aJdBGE
PSI Woodworking LCENTSS21 #2 MT with 5/8-Inch Crown Super Wood Lathe Drive Center https://amzn.to/3aJo45c
You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website https://www.mikepeacewoodturning.com/
3 سال پیش
در تاریخ 1400/08/20 منتشر شده
است.
7,302
بـار بازدید شده