Zircon Tip Minute 15: Why You Need to Calibrate your Zircon Stud Finder
93 هزار بار بازدید -
13 سال پیش
-
Why You Need to Calibrate
Why You Need to Calibrate your Zircon Stud Finder. Zircon Tip Minutes with Eric, the Zircon Tip Guy, are designed to give you essential tips about your stud finder that you can use in most of your DIY and home improvement projects (hanging pictures, mounting shelves, etc.). In this Tip Minute, Eric explains the importance of the stud finding calibration process and why it's so important to properly calibrate your stud finder so you can get the best readings when scanning for a stud.
* Indoor Use Only *
For more information about Zircon stud finders and other products:
http://www.zircon.com
Instagram: zircontools
Facebook: ZirconTools
Twitter: zircontools
* A BRAND NEW 9V ALKALINE BATTERY IS REQUIRED FOR OPERATION. * https://www.zircon.com/2014/06/11/how...
1-800-245-9265 Toll-free, Mon - Fri. 8am - 5pm PST (excluding holidays)
Caution: Do not rely exclusively on scanners to locate objects behind a scanned surface. Some objects may not be detectable by your scanner. Use additional information sources such as visible points of entry of pipes and wiring into walls, standard 16” and 24” (40 – 60 cm) stud spacing practices, and construction plans to determine the likely location of hidden objects. Always use caution before drilling or cutting.
WARNING: ALWAYS TURN OFF THE ELECTRIC, GAS, AND WATER SUPPLIES BEFORE PENETRATING A SURFACE. NEVER ASSUME THERE ARE NO LIVE ELECTRICAL WIRES IN A WALL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE, SERIOUS INJURY, AND/OR PROPERTY DAMAGE.
* Indoor Use Only *
For more information about Zircon stud finders and other products:
http://www.zircon.com
Instagram: zircontools
Facebook: ZirconTools
Twitter: zircontools
* A BRAND NEW 9V ALKALINE BATTERY IS REQUIRED FOR OPERATION. * https://www.zircon.com/2014/06/11/how...
1-800-245-9265 Toll-free, Mon - Fri. 8am - 5pm PST (excluding holidays)
Caution: Do not rely exclusively on scanners to locate objects behind a scanned surface. Some objects may not be detectable by your scanner. Use additional information sources such as visible points of entry of pipes and wiring into walls, standard 16” and 24” (40 – 60 cm) stud spacing practices, and construction plans to determine the likely location of hidden objects. Always use caution before drilling or cutting.
WARNING: ALWAYS TURN OFF THE ELECTRIC, GAS, AND WATER SUPPLIES BEFORE PENETRATING A SURFACE. NEVER ASSUME THERE ARE NO LIVE ELECTRICAL WIRES IN A WALL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE, SERIOUS INJURY, AND/OR PROPERTY DAMAGE.
13 سال پیش
در تاریخ 1390/02/09 منتشر شده
است.
93,041
بـار بازدید شده