Circuit oscillating square pulse frequency 50Hz 60hZ frequency adjustment Easy to understand expla
21.2 هزار بار بازدید -
2 سال پیش
-
The application makes a 50Hz
The application makes a 50Hz 60Hz booster circuit, makes the driver blink, shows how the circuit oscillates with LEDs. The circuit generates a square pulse with an adjustable frequency by changing the resistor, turning the potentiometer, replacing the capacitor, increasing or decreasing the power supply. Time of each led light to dark Ton= Toff= 0.69 R2(Ω)xC1(F) seconds. Frequency F=1/T=1/(Ton+Toff). Electronic circuit using transistor pnp s8550, resistor, capacitor, LED performance. Using an analog P-channel mosfet, with an npn transistor or a P-channel mosfet you change the polarity of the components and the power supply. In the video, I have a circuit diagram and explain in detail the operating principle of the circuit, How to calculate the values of frequency F, period T.
+ Hope the video is useful to you. Good luck with your practice
+ Thank you for watching the video. Remember to support by SHARE, LIKE, and SUBSCRIBE
Copyright Teach At Hand DIY.
Do Not Reup.
#tech #techathandDIY #ampli #control
+ Hope the video is useful to you. Good luck with your practice
+ Thank you for watching the video. Remember to support by SHARE, LIKE, and SUBSCRIBE
Copyright Teach At Hand DIY.
Do Not Reup.
#tech #techathandDIY #ampli #control
2 سال پیش
در تاریخ 1401/06/06 منتشر شده
است.
21,203
بـار بازدید شده