2004 Acura 3.2L TL Engine Replacement (Part 1)
605.8 هزار بار بازدید -
8 سال پیش
-
2004 Acura 3.2L TL Engine
2004 Acura 3.2L TL Engine Replacement (Part 2): 2004 Acura 3.2L TL Engine Replacement...
2004 Acura 3.2L TL Engine Replacement (Part 3): 2004 Acura 3.2L TL Engine Replacement...
2004 Acura 3.2L TL Engine Replacement (Part 4): 2004 Acura 3.2L TL Engine Replacement...
Link to full version of this video: http://www.ericthecarguy.com/premium-...
This is the first installment of the 2004 3.2L TL Engine Replacement series. There's a bit of a bonus with this series in that the vehicle getting the engine has a manual transmission. The engine we're using came out of a vehicle with an automatic. So for those of you interested in an automatic to manual swap, this gives you a pretty good indication of what you're up against. BTW, you would also need to swap computers if you were going from automatic to manual.
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Camera: Brian Kast
Eric Cook
Thanks for watching!
Discussion about this video: http://www.ericthecarguy.com/kunena/1...
Related Videos
The Flat Rate System: The Flat Rate System
Working on Crappy Cars: Link posted when video available.
Wheel Locks: How To Remove Wheel Locks Without a K...
Drain Plug Repair: How to Repair A Stripped Out Aluminum...
Delco 1/2" Impact Review: AC Delco ARI2023 1/2 Inch Impact Tool...
Dewalt 3/8" Impact Review: DeWalt DC823KA 18v 3/8 Impact Tool Re...
CV Boot Replacement: How To Replace CV Boots - EricTheCarGuy
Removing Studs, The 2 Nut Method: How To Remove and Install Studs the '...
Catalytic Converter Diagnosis: P0420 How To Diagnose A Bad Catalytic...
How To Diagnose Exhaust Restrictions: How To Diagnose Exhaust Restrictions ...
How To Use a Torch to Remove Rusty Fasteners: How To Use A Torch To Remove Rusty Bo...
Bendpak Lift: BendPak XPR-10A-LP 2 Post Lift Introd...
Microstart: Micro-start XP-1 Review -EricTheCarGuy
Power Balance Testing: How To Perform A Power Balance Test ...
How To Bleed a Cooling System: How To Bleed A Cooling System - EricT...
Grey Pneumatic Sockets: Grey Pneumatic 81635MRD Socket Set Re...
Tools
Silicone Paste: https://www.jbtoolsales.com/3m-08946-...
Body Clip Tool: https://www.jbtoolsales.com/gearwrenc...
Zep Super Rust Breaker: http://www.zepautomotive.com/product/...
Grey Pneumatic 3/8" Sockets: http://www.jbtoolsales.com/grey-pneum...
Hose Pliers (For Electrical Connectors): https://www.jbtoolsales.com/gearwrenc...
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGu...
Twitter: Twitter: EricTheCarGuy
Google+: https://plus.google.com/1001951801966...
Instagram: Instagram: ericthecarguy
Information on Premium Membership: https://www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
2004 Acura 3.2L TL Engine Replacement (Part 3): 2004 Acura 3.2L TL Engine Replacement...
2004 Acura 3.2L TL Engine Replacement (Part 4): 2004 Acura 3.2L TL Engine Replacement...
Link to full version of this video: http://www.ericthecarguy.com/premium-...
This is the first installment of the 2004 3.2L TL Engine Replacement series. There's a bit of a bonus with this series in that the vehicle getting the engine has a manual transmission. The engine we're using came out of a vehicle with an automatic. So for those of you interested in an automatic to manual swap, this gives you a pretty good indication of what you're up against. BTW, you would also need to swap computers if you were going from automatic to manual.
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Camera: Brian Kast
Eric Cook
Thanks for watching!
Discussion about this video: http://www.ericthecarguy.com/kunena/1...
Related Videos
The Flat Rate System: The Flat Rate System
Working on Crappy Cars: Link posted when video available.
Wheel Locks: How To Remove Wheel Locks Without a K...
Drain Plug Repair: How to Repair A Stripped Out Aluminum...
Delco 1/2" Impact Review: AC Delco ARI2023 1/2 Inch Impact Tool...
Dewalt 3/8" Impact Review: DeWalt DC823KA 18v 3/8 Impact Tool Re...
CV Boot Replacement: How To Replace CV Boots - EricTheCarGuy
Removing Studs, The 2 Nut Method: How To Remove and Install Studs the '...
Catalytic Converter Diagnosis: P0420 How To Diagnose A Bad Catalytic...
How To Diagnose Exhaust Restrictions: How To Diagnose Exhaust Restrictions ...
How To Use a Torch to Remove Rusty Fasteners: How To Use A Torch To Remove Rusty Bo...
Bendpak Lift: BendPak XPR-10A-LP 2 Post Lift Introd...
Microstart: Micro-start XP-1 Review -EricTheCarGuy
Power Balance Testing: How To Perform A Power Balance Test ...
How To Bleed a Cooling System: How To Bleed A Cooling System - EricT...
Grey Pneumatic Sockets: Grey Pneumatic 81635MRD Socket Set Re...
Tools
Silicone Paste: https://www.jbtoolsales.com/3m-08946-...
Body Clip Tool: https://www.jbtoolsales.com/gearwrenc...
Zep Super Rust Breaker: http://www.zepautomotive.com/product/...
Grey Pneumatic 3/8" Sockets: http://www.jbtoolsales.com/grey-pneum...
Hose Pliers (For Electrical Connectors): https://www.jbtoolsales.com/gearwrenc...
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGu...
Twitter: Twitter: EricTheCarGuy
Google+: https://plus.google.com/1001951801966...
Instagram: Instagram: ericthecarguy
Information on Premium Membership: https://www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
8 سال پیش
در تاریخ 1395/02/10 منتشر شده
است.
605,831
بـار بازدید شده