Update on Franzis tube radio kit - volume modification

This video details adding an electronic component to the Franzis Radio Kit. The component is a 10uf 25v capacitor that is soldered to pins 1 and 8 of the integrated circuit (IC). Pin 1 and Pin 8 are across from each other. Pin 1 is to the left of the notch of the chip. The positive (+) side of the capacitor connects to Pin 1, and the negative (-) side connects to Pin 8. If you don’t like the mod you just remove the capacitor.
Thanks to Manuel Lausmann for this modification! Here is his original video in German - Franzis Röhrenradio Teil 2 - Modifika...