Easy Current & Voltage Measurements w/Arduino and LTC2945
36.6 هزار بار بازدید -
7 سال پیش
-
Had a recent project where
Had a recent project where I needed to measure voltage and current in my design. I stumbled on the LTC2945 power monitor and thought it was so cool that I designed my one little mini board for it. Here's a demo video and tutorial on how to get things up and running.
Datasheet: http://cds.linear.com/docs/en/datashe...
My Wiki for the board: http://www.kevindarrah.com/wiki/index...
That 328 board I was using: http://www.kevindarrah.com/wiki/index...
and you get your own here: http://mklec.com/project-kits/kd-circ...
The CODE: http://kevindarrah.com/download/ardui...
Check this part out too - lower cost alternate from Texas Instruments INA230: https://www.digikey.com/product-detai...
Check out my Tindie store (trigBoard is available) https://www.tindie.com/stores/kdcircu...
Thanks to all the Patrons for dropping a few bucks in the tip jar to help make these videos happen!
Patreon: kdarrah
Twitter: Twitter: KDcircuits
For inquiries or design services:
https://www.kdcircuits.com
Datasheet: http://cds.linear.com/docs/en/datashe...
My Wiki for the board: http://www.kevindarrah.com/wiki/index...
That 328 board I was using: http://www.kevindarrah.com/wiki/index...
and you get your own here: http://mklec.com/project-kits/kd-circ...
The CODE: http://kevindarrah.com/download/ardui...
Check this part out too - lower cost alternate from Texas Instruments INA230: https://www.digikey.com/product-detai...
Check out my Tindie store (trigBoard is available) https://www.tindie.com/stores/kdcircu...
Thanks to all the Patrons for dropping a few bucks in the tip jar to help make these videos happen!
Patreon: kdarrah
Twitter: Twitter: KDcircuits
For inquiries or design services:
https://www.kdcircuits.com
7 سال پیش
در تاریخ 1396/01/24 منتشر شده
است.
36,611
بـار بازدید شده