Control Systems Engineering - Lecture 6a - Frequency Response
78 هزار بار بازدید -
13 سال پیش
-
Lecture 6 for Control Systems
Lecture 6 for Control Systems Engineering (UFMEUY-20-3) and Industrial Control (UFMF6W-20-2) at UWE Bristol. Slides are available here: http://www.cems.uwe.ac.uk/~bw-drew/CS...
This lecture introduces frequency response, amplitude ratio and phase angle. Ways to represent frequency response graphically are introduced using the Nyquist Diagram and Bode plots. An example of constructing a bode plot is shown. System identification is also included, with an example problem describing how a transfer function can be found from the bode plot.
This lecture introduces frequency response, amplitude ratio and phase angle. Ways to represent frequency response graphically are introduced using the Nyquist Diagram and Bode plots. An example of constructing a bode plot is shown. System identification is also included, with an example problem describing how a transfer function can be found from the bode plot.
13 سال پیش
در تاریخ 1390/08/17 منتشر شده
است.
78,025
بـار بازدید شده