Cyclone Drone TriMode VTOL Tricopter by Nick Rehm - Most Interesting Aircraft at Flite Fest 2023
3 هزار بار بازدید -
پارسال
-
Here's a super neat and
Here's a super neat and unique aircraft (my favorite kind!) that I saw while at the Flite Test FliteFest 2023 event. It's made by Nick Rehm (creator of dRehmFlight firmware) and he calls it a Cyclone Drone TriMode VTOL Tricopter (and I think it looks like a flying propeller).
See my other videos from flitefest here: FLITE FEST Mega Playlist
And see Nick's video about his design here: The Spinning Drone Paradox - Part 1
And his channel: @NicholasRehm @nicholasrehm
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON: Patreon: RCwithAdam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam
See my other videos from flitefest here: FLITE FEST Mega Playlist
And see Nick's video about his design here: The Spinning Drone Paradox - Part 1
And his channel: @NicholasRehm @nicholasrehm
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON: Patreon: RCwithAdam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam
پارسال
در تاریخ 1402/04/05 منتشر شده
است.
3,006
بـار بازدید شده