ET200SP CM PtP (6ES7 137-6AA00-0BA0) - Modbus RTU
37.5 هزار بار بازدید -
8 سال پیش
-
I try get data from
I try get data from remote Modbus RTU device. But no success.
I use module (6ES7 137-6AA00-0BA0) in ET200SP station, which connected to CPU 315-2 PN/DP (6ES7 315-2EH14-0AB0) V3.2. (configuration in attached video)
as slave I use MOD_RSSIM - http://www.plcsimulator.org/
6ES7 137-6AA00-0BA0 connected to MOD_RSSIM through Moxa uPort 1150I
For connecting I use pins 12 (T(A)/R(A)), 14 (T(B)/R(B)) and 16 (PE Ground) of module 6ES7 137-6AA00-0BA0.
After REQ for reading - BUSY output switched to TRUE (as long as REQ is TRUE), DONE and ERROR outputs without changing.
Configuration is Ok? What is wrong? What should I check?
I use module (6ES7 137-6AA00-0BA0) in ET200SP station, which connected to CPU 315-2 PN/DP (6ES7 315-2EH14-0AB0) V3.2. (configuration in attached video)
as slave I use MOD_RSSIM - http://www.plcsimulator.org/
6ES7 137-6AA00-0BA0 connected to MOD_RSSIM through Moxa uPort 1150I
For connecting I use pins 12 (T(A)/R(A)), 14 (T(B)/R(B)) and 16 (PE Ground) of module 6ES7 137-6AA00-0BA0.
After REQ for reading - BUSY output switched to TRUE (as long as REQ is TRUE), DONE and ERROR outputs without changing.
Configuration is Ok? What is wrong? What should I check?
8 سال پیش
در تاریخ 1395/01/17 منتشر شده
است.
37,510
بـار بازدید شده