HOW TO REPLACE HEADLIGHT BULB FAST & EASY 2010 - 2017 CHEVROLET EQUINOX - LOW BEAM LIGHT BULB

HOW TO REPLACE HEADLIGHT BULB FAST & EASY 2010 - 2017 CHEVROLET EQUINOX - LOW BEAM LIGHT BULB REPLACEMENT WITHOUT REMOVING HEADLIGHT!

Hey guys in this video, our headlight was only working on high beam but the low beam was not working in the passenger side.

We went ahead and got a replacement bulb from the auto parts store and we show you how easy it is to replace it! You can do this by yourself! Perfect DIY! It requires minimal tools!

We used a T-20 Torx screw & a 7 mm socket and ratchet!

First step is to turn your wheel to have enough clearance to get your hand in there.

Second step is to remove the clips holding the inner fender liner off use your T-20 Torx bit or screwdriver to remove the screws necessary to open it!

Third step is to look at the bottom and remove the 2 7mm screws holding it tight.

Fourth step is to remove the cap protecting the bulb.

Fifth step is to remove the bulb and re install it all in reverse order!!

Don’t forget to like and subscribe to my channel!!