⚡ Pride Mobility Scooter Not Working? Analyzing Beep Codes and Troubleshooting

Is your Pride Mobility Scooter Beeping? Will your Go GO scooter or Victory not work? Here is a guide on how to do the basics when troubleshooting your Pride Mobility Scooter.  For more great videos like this video and subscribe to our channel. Visit MobilityDirect.com or call us at 877-721-7748 thanks for watching.

Pride Mobility Beep Codes
■ (1)
Battery voltage is too low to operate the
Travel Scooter.
Charge batteries as soon as possible.
■■ (2)  
Battery charge is too low. Charge batteries.
■■■ (3)
The Travel Scooter’s battery voltage is too high
to operate the scooter, or the charger is still
connected to the off-board charger port.
Unplug charger and/or turn key off, then back on
again. If traveling down a slope, reduce Travel
Scooter speed to the minimum setting.
■■■■ (4)
Current limit time out. Turn the Travel Scooter off for a few minutes,
then turn your Travel Scooter back on.
■■■■■ (5)
The manual freewheel lever is in the (forward)
freewheel position.
Remove the key from the key switch, then
push the manual freewheel lever to the drive
(rearward) position and restart your Travel
Scooter.
■■■■■■ (6)
Throttle control lever not at center position at
start up.Verify that the batteries are fully charged. If
the batteries are fully charged, then return the
throttle control lever to center position, turn
Travel Scooter off then back on.
■■■■■■■ (7)
Speed pot error. Contact your authorized Provider for assistance.
■■■■■■■■ (8)
Motor volts error. Contact your authorized Provider for assistance.
■■■■■■■■■ (9)
Other internal errors. Contact your authorized Provider for assistance.

If you are looking for parts and accessories for your Pride Mobility Scooter visit out website https://www.mobilityscootersdirect.co...

• #entertainment
• #troubleshooting
• #diy
• #repair
• #service
• #mobility_scooter
• #not_working
• #wont_start