Protect Your Massey Ferguson GC 1723, 1725, 1710, 1715 Fan and Filter With This Device.
11.5 هزار بار بازدید -
2 سال پیش
-
Learn about the Sentinel manufactured
Learn about the Sentinel manufactured for the Massey Ferguson GC1723E, GC1723EB, GC1725M, GC1725MB, GC1705, GC1710, GC1715, and GC1720 by RetailREMS.
It is a device that is engineered to protect for fan and filter from damage from tour PTO rod, sticks or any other thing that could cause damage underneath your subcompact tractor.
I also purchased steps for both sides of my tractor to help me up and off again. Saves my knees big time.
I am not sponsored by this company. I just believe in their product and needed to prevent any more damage to my tractor.
The Sentinel is made with industry standard 1/8” thick steel plate and powder coated to make it long lasting. It is engineered to have the PTO bracket give it extra strength with right angles.
Reasons to get a Sentinel
People that have a Mid Mount mower sometimes do not get the drive shaft locked in completely.
When it comes loose it takes out the hydraulic filter or worse. The Sentinel actually gives more room to connect up the MMM drive shaft.
A stick can go up and take out the hydraulic plastic fan.
Tall grass and going around the drive shaft and taking out the O-ring or O-ring is not expensive, but labor can be very expensive. Tractor down time is bad; these issues are usually not covered by warranty.
The Sentinel sells for $150
The steps are $65 each
RetailREMS website address is:
https://retailrems.com
Tell Mark that you found out about his equipment through Cornbread Creek Farm.
It is a device that is engineered to protect for fan and filter from damage from tour PTO rod, sticks or any other thing that could cause damage underneath your subcompact tractor.
I also purchased steps for both sides of my tractor to help me up and off again. Saves my knees big time.
I am not sponsored by this company. I just believe in their product and needed to prevent any more damage to my tractor.
The Sentinel is made with industry standard 1/8” thick steel plate and powder coated to make it long lasting. It is engineered to have the PTO bracket give it extra strength with right angles.
Reasons to get a Sentinel
People that have a Mid Mount mower sometimes do not get the drive shaft locked in completely.
When it comes loose it takes out the hydraulic filter or worse. The Sentinel actually gives more room to connect up the MMM drive shaft.
A stick can go up and take out the hydraulic plastic fan.
Tall grass and going around the drive shaft and taking out the O-ring or O-ring is not expensive, but labor can be very expensive. Tractor down time is bad; these issues are usually not covered by warranty.
The Sentinel sells for $150
The steps are $65 each
RetailREMS website address is:
https://retailrems.com
Tell Mark that you found out about his equipment through Cornbread Creek Farm.
2 سال پیش
در تاریخ 1401/02/23 منتشر شده
است.
11,580
بـار بازدید شده