Reel Mower Height of Cut Bar on a Budget
7.6 هزار بار بازدید -
6 سال پیش
-
This is a DIY height
This is a DIY height of cut bar that can be made for less than $10. These are used in setting your bench HOC on a greens mower. This is an essential tool to ensure that your height of cut is level. While typically used on greens mowers, this can also be used with home owner models to get an accurate representation of the height adjustment notches.
The Original Budget HOC Bar Link. https://thelawnforum.com/viewtopic.ph...
#greensmower #reellowdad #lawncare
Check out below if you cannot get enough!
Subscribe: https://bit.ly/2ywjuDM
Instagram: Instagram: reellowdad
Twitter: Twitter: reellowdad
https://reellowdad.com
If you really like what you see feel free to support me at Patreon: reellowdad
The Original Budget HOC Bar Link. https://thelawnforum.com/viewtopic.ph...
#greensmower #reellowdad #lawncare
Check out below if you cannot get enough!
Subscribe: https://bit.ly/2ywjuDM
Instagram: Instagram: reellowdad
Twitter: Twitter: reellowdad
https://reellowdad.com
If you really like what you see feel free to support me at Patreon: reellowdad
6 سال پیش
در تاریخ 1397/11/23 منتشر شده
است.
7,690
بـار بازدید شده