Proxxon PD 250/E Lathe Tailstock Maintenance (Cleaning & Adjusting)

Robert's Smorgasbord
Robert's Smorgasbord
775 بار بازدید - 4 ماه پیش - I think my tailstock is
I think my tailstock is on the loose, so it’s time to take it apart … ↓↓↓ Complete description, time index and links below ↓↓↓ I’m using my Proxxon PD 250/E lathe for one and a half years now (link below). And I really did put it through its paces, at one time even creating a little smoke (link below). So it’s no surprise that my tailstock is in need of some TLC. First we slide the tailstock off the ways and take it apart. After some cleaning we slide it back on and put it back together (after lubricating it of course – which I almost forgot). Finally we adjust the play of the barrel. 00:00 Intro – tailstock maintenance on Proxxon PD 250/E 00:31 Problem – far too loose and too much play 02:02 Disassembly – just take it off and take it apart 06:51 Cleaning – everything with denatured alcohol 09:04 Reassembly – two grub screws & two bolts with nuts 14:59 Result – everything is nice and tight now 15:32 Wrap-up – next is the electronic wheel again, bye Repairs    • Repairs   PROXXON Precision Lathe PD 250/E Unboxing and First Impressions    • PROXXON Precision Lathe PD 250/E Unbo...   Electronic Steering Wheel / Rudder Jog IP68    • Electronic Steering Wheel / Rudder Jo...   Electronic Steering Wheel / Rudder Jog IP68 (5): Overview, Wheel Hub (1)    • Electronic Steering Wheel / Rudder Jo...   #proxxon #maintenance #cleaning #lubrication #adjusting #robertssmorgasbord
4 ماه پیش در تاریخ 1403/02/23 منتشر شده است.
775 بـار بازدید شده
... بیشتر