1:1 Choke/Balun Build

This is my 1:1 Choke Balun Build. I may use this on an upcoming new antenna project e.g. doublet, dipole or fan-dipole. I can also add and adapt this design to make a 4:1 balun for say a loop or off-centre fed dipole. In researching this build I can recommend the following two sources of information: G3TXQ (SK) Baluns: www.karinya.net/g3txq/baluns/ and chokes: www.karinya.net/g3txq/chokes/ TRX Lab/Bench:    • #100 Balun PART 1: Broadcast Interfer...   (Part 1 of a 3 part series - watch them all!) I sourced my 2x1m (red & black) wire lengths here in the UK at: www.hobbyrc.co.uk/18-awg-flexible-silicone-wire-bl… This is one of many amateur/ham radio related videos on my channel. Please feel free to browse 👀, like 👍🏻 and subscribe 🔔, remembering to hit the bell so you’re notified of new videos as soon as they're published and you don't miss out. Thanks.

• #science_technology
• #amateur_radio
• #ham_radio
• #balun
• #choke
• #ferrite
• #type_31
• #type_43
• #ptfe
• #11
• #ft240
• #diy
• #home_brew
• #build
• #core
• #dipole
• #doublet