How to build a plywood boat: Part 1 - a DIY project for the garage
224 هزار بار بازدید -
8 سال پیش
-
The Story of how I
The Story of how I built a 3-metre plywood boat in my garage. The book about the building of this boat is just out!
https://www.amazon.com/dp/B07HLKZ8LQ This video goes step by step through the process of building this plywood and epoxy boat in 1 month. Working with my son after school.
It was all built using basic tools in a one car garage. It is a great low-cost project and I didn't need registration or a licence (in Queensland, Australia). We could walk the boat to the water, without the need for a car or trailer too!
A BUILDING GUIDE will be available shortly - Feb 2018. It has all the tips and info you need to build ANY small boat like this. Not just this boat. Join our Mail List and I will send you a free copy.
http://eepurl.com/cYONy5.
More info - https://timwestonboats.com/plans/
Materials:-
Exterior grade - economy plywood
Pine framing
Fibreglass tape
Epoxy resin plus some filler.
Plus an outboard motor.
There are PLANS available to build this boat at
https://timwestonboats.com/plans/plan...
Uploaded in HD-1080p. Check your player settings for best quality (gear symbol, bottom right on a computer)
The hull was redesigned and modified after launching so that the centre channel was reduced in steps toward the stern (back of the boat). This gave the best of both worlds then with improved stability, eliminated propeller cavitation that occurred in turns but still provided good planing and wave piercing due to the deep V bow shape. The plans available now incorporate this change.
Filmed by me. Noosa River, Australia.
Edited with iMovie
Built with my son Tobias - 2010.
Music - "Sunflower" by Topher Mohr and Alex Elena & "Bet on it" by Silent Partner. YouTube Audio library.
Thanks for watching...
https://www.amazon.com/dp/B07HLKZ8LQ This video goes step by step through the process of building this plywood and epoxy boat in 1 month. Working with my son after school.
It was all built using basic tools in a one car garage. It is a great low-cost project and I didn't need registration or a licence (in Queensland, Australia). We could walk the boat to the water, without the need for a car or trailer too!
A BUILDING GUIDE will be available shortly - Feb 2018. It has all the tips and info you need to build ANY small boat like this. Not just this boat. Join our Mail List and I will send you a free copy.
http://eepurl.com/cYONy5.
More info - https://timwestonboats.com/plans/
Materials:-
Exterior grade - economy plywood
Pine framing
Fibreglass tape
Epoxy resin plus some filler.
Plus an outboard motor.
There are PLANS available to build this boat at
https://timwestonboats.com/plans/plan...
Uploaded in HD-1080p. Check your player settings for best quality (gear symbol, bottom right on a computer)
The hull was redesigned and modified after launching so that the centre channel was reduced in steps toward the stern (back of the boat). This gave the best of both worlds then with improved stability, eliminated propeller cavitation that occurred in turns but still provided good planing and wave piercing due to the deep V bow shape. The plans available now incorporate this change.
Filmed by me. Noosa River, Australia.
Edited with iMovie
Built with my son Tobias - 2010.
Music - "Sunflower" by Topher Mohr and Alex Elena & "Bet on it" by Silent Partner. YouTube Audio library.
Thanks for watching...
8 سال پیش
در تاریخ 1395/02/07 منتشر شده
است.
224,037
بـار بازدید شده