How to Clean a 3d Printer Nozzle Correctly - Useful Tips To Save Money
255.7 هزار بار بازدید -
2 سال پیش
-
In this video i'm going
In this video i'm going to show you two quick methods to clean out a 3d printer nozzle. One can be done with the nozzle still attached to your printer and the other is with the nozzle removed.
There are a few different reasons why you might need to clean your nozzle but a clog or partial clog are the most common. You may simply want to completely remove one colour filament before starting with another colour and don't want to push it all through the nozzle. Either way, these methods will help you do this.
...............................................................................................................................................................
BUY ME A COFFEE
If you're enjoying my content, why not consider supporting the channel by buying me a coffee?
Even very small amounts are greatly appreciated and re-invested into bringing you better content.
https://www.buymeacoffee.com/rickyimpey
...............................................................................................................................................................
Affiliate links (If you purchase something after clicking any of the below links I may earn a small commission at no cost to you. This is a great way to support the channel)
Brass wire brush
US https://amzn.to/3yBDIur
UK https://amzn.to/3mckhDv
Rigger (leather) gloves
US https://amzn.to/3md7ZKS
UK https://amzn.to/3F5yaed
Soldering Iron
US https://amzn.to/3nKzsEu
UK https://amzn.to/3nMb8lJ
Nozzle Spanner (6mm Standard Ender 3 v2)
US https://amzn.to/3GUsX9E
UK https://amzn.to/3mdQXfQ
Replacement Nozzles
US https://amzn.to/3mcVIGG
UK https://amzn.to/325x2ZF
Ender 3 v2 3d Printer
Amazon
US https://amzn.to/3lthhlW
UK https://amzn.to/3xXZYOU
Banggood
https://uk.banggood.com/custlink/DmvY...
There are a few different reasons why you might need to clean your nozzle but a clog or partial clog are the most common. You may simply want to completely remove one colour filament before starting with another colour and don't want to push it all through the nozzle. Either way, these methods will help you do this.
...............................................................................................................................................................
BUY ME A COFFEE
If you're enjoying my content, why not consider supporting the channel by buying me a coffee?
Even very small amounts are greatly appreciated and re-invested into bringing you better content.
https://www.buymeacoffee.com/rickyimpey
...............................................................................................................................................................
Affiliate links (If you purchase something after clicking any of the below links I may earn a small commission at no cost to you. This is a great way to support the channel)
Brass wire brush
US https://amzn.to/3yBDIur
UK https://amzn.to/3mckhDv
Rigger (leather) gloves
US https://amzn.to/3md7ZKS
UK https://amzn.to/3F5yaed
Soldering Iron
US https://amzn.to/3nKzsEu
UK https://amzn.to/3nMb8lJ
Nozzle Spanner (6mm Standard Ender 3 v2)
US https://amzn.to/3GUsX9E
UK https://amzn.to/3mdQXfQ
Replacement Nozzles
US https://amzn.to/3mcVIGG
UK https://amzn.to/325x2ZF
Ender 3 v2 3d Printer
Amazon
US https://amzn.to/3lthhlW
UK https://amzn.to/3xXZYOU
Banggood
https://uk.banggood.com/custlink/DmvY...
2 سال پیش
در تاریخ 1400/11/01 منتشر شده
است.
255,773
بـار بازدید شده