Fluval FX6 Rim Connector Upgrade - Intake and Output Mod. Custom DIY Plumbing
35.5 هزار بار بازدید -
2 سال پیش
-
Fluval’s FX6 Rim clamp doesn’t
Fluval’s FX6 Rim clamp doesn’t fit over the rim of most aquariums 75 gallons and larger. Use this DIY PVC and tubing mod to eliminate the need for the rim clamp.
The following is a parts list to do one FX6 both intake and output.
-(1)Roll of 1” pond tubing from Lowe’s or Home Depot (will actual do 2 complete set ups)
https://www.homedepot.com/p/BECKETT-1...
- (4) 1” 90s
https://www.homedepot.com/p/Charlotte...
-(1) 2’ piece of 1” PVC
https://www.homedepot.com/p/VPC-1-in-...
-(2) slip/FPT coupling
https://www.homedepot.com/p/Charlotte...
-(3 or 4) 1” barbed fitting.
https://www.pvcfittingsonline.com/1-s...
-(1) 1 1/8 barb fitting
https://www.replacementboatparts.com/...
You will also need some PVC primer and glue as well as a good set of PVC cutters 
The following is a parts list to do one FX6 both intake and output.
-(1)Roll of 1” pond tubing from Lowe’s or Home Depot (will actual do 2 complete set ups)
https://www.homedepot.com/p/BECKETT-1...
- (4) 1” 90s
https://www.homedepot.com/p/Charlotte...
-(1) 2’ piece of 1” PVC
https://www.homedepot.com/p/VPC-1-in-...
-(2) slip/FPT coupling
https://www.homedepot.com/p/Charlotte...
-(3 or 4) 1” barbed fitting.
https://www.pvcfittingsonline.com/1-s...
-(1) 1 1/8 barb fitting
https://www.replacementboatparts.com/...
You will also need some PVC primer and glue as well as a good set of PVC cutters 
2 سال پیش
در تاریخ 1401/01/24 منتشر شده
است.
35,523
بـار بازدید شده