Integrating WLED into xLights - The "TechTurtle" easy way! - 12 Streams of Christmas #8
18.2 هزار بار بازدید -
3 سال پیش
-
First of all, thanks to
First of all, thanks to Raven ridge lights (Turtle)💫🚀🔶(TechTurtleTube#9384 on Discord) for summing the step by step instructions for setting up the Xlights to wLED connection. This worked awesome making the first 20 minutes of the video an excellent tutorial on how to do it.
Then, sorry for the next 35 minutes where we had stream problems and were not able to get any useful information on xLights Sequencing. I suggest you use the chapter titles to skip that part (unless you like to see me get a bit salty) and pick it back up at 00:55:20.
00:00:00 Stream Greetings
00:03:15 xLights on wLED introduction
00:07:00 Start @ Beginning Step by step setup
00:07:56 On the wLED device install 13 beta or higher
00:08:51 xLights In controller tab
00:10:05 Add Ethernet
00:10:28 On right choose Vendor wLED
00:10:55 Model Dig-Uno or Dig-Quad
00:11:08 Auto size (checked) (will appear when u click auto layout)
00:11:22 Auto layout(checked)
00:11:30 Make sure IP address is correct (same as wLED app for the device wanting to control)
00:12:00 Change it from e1.31 to DDP
00:12:30 Uncheck the keep channel numbers
00:12:38 Go to layout tab make a single string set the number of pixels in the string setting in bottom left
00:13:09 Click save Save SAVE (Important)
00:13:21 Go back to controller tab
00:13:27 Click the visualizer
00:14:10 Drag and drop things to ports
00:16:10 Close window hit save on controller tab and layout tab (Everything in your layout must have a home on a port or you will have channel overlaps)(overlaps=drunk pixels)
00:16:38 Go back to controller tab and hit upload outputs
00:19:00 Done. It will configure the strings, pixel counts, segments and start channels
00:19:20 Let’s do some Sequencer Changes
00:28:00 Attempt to Import a Sequence (FAIL)
00:32:12 Stubs Xmas for a PixelHeads Rescue (MAYBE)
00:53:00 Try another Sequence (FAIL)
00:54:54 Summarize Last 35 Minutes (KABOOM)
00:55:20 Summarize First 20 Minutes (AWESOME)
01:00:27 General Chat
01:02:10 haespncalendar https://github.com/afwelch/haespncale...
xLights website for the software and related information: https://xlights.org/ (BE SURE TO SUPPORT THEM FOR THE AWESOME SOFTWARE!!)
( If any of these links don't work, look here: https://drzzs.com/products/ or https://www.amazon.com/shop/drzzs )
IMPORTANT LINKS:
https://drZzs.com
#DrZzs
Discord help from the Pixelheads: Discord: discord
#wLED Discord: Discord: discord
#wLED WIKI: https://kno.wled.ge/
LED Troubleshooting Flowchart: https://drzzs.com/wp-content/uploads/...
LED Flicker Troubleshooting Flowchart: https://drzzs.com/wp-content/uploads/...
US get #QuinLED #DigUno board here: https://drzzs.com/shop/dig-uno/
International here: https://quinled.info/pre-assembled-qu...
US get QuinLED #DigQuad board here: https://drzzs.com/shop/digquad/
International customers here: https://quinled.info/pre-assembled-qu...
#PermaTrack Community Page: Discord: discord
Buy PermaTrack: https://www.permatrack.us/shop/permat...
DrZzs Store: https://www.drzzs.com/shop
DrZzs Favorite Things List: https://drzzs.com/products/
DrZzs Amazon Page: https://www.amazon.com/shop/drzzs
Social Media:
Discord DrZzs - https://discord.me/drzzs
#DrZzs Facebook Page: https://fb.me/DrZzs
Message: https://m.me/DrZzs
Group: Facebook: 1969622823351838
Discord Home Assistant - Discord: discord
Twitter: Twitter: Dr_Zzs
Instagram: Instagram: drzzs
Dancing Squirrels 3D Animations Courtesy 3ATIVE Studios https://www.3ative.com/
Music:Happy Rock Licensed from:
https://www.bensound.com/royalty-free...
Music:Jazzy Frenchy Licensed from:
https://www.bensound.com/royalty-free...
DrZzs may be compensated if using some of the links provided.
Powered by Restream https://restre.am/yt
Then, sorry for the next 35 minutes where we had stream problems and were not able to get any useful information on xLights Sequencing. I suggest you use the chapter titles to skip that part (unless you like to see me get a bit salty) and pick it back up at 00:55:20.
00:00:00 Stream Greetings
00:03:15 xLights on wLED introduction
00:07:00 Start @ Beginning Step by step setup
00:07:56 On the wLED device install 13 beta or higher
00:08:51 xLights In controller tab
00:10:05 Add Ethernet
00:10:28 On right choose Vendor wLED
00:10:55 Model Dig-Uno or Dig-Quad
00:11:08 Auto size (checked) (will appear when u click auto layout)
00:11:22 Auto layout(checked)
00:11:30 Make sure IP address is correct (same as wLED app for the device wanting to control)
00:12:00 Change it from e1.31 to DDP
00:12:30 Uncheck the keep channel numbers
00:12:38 Go to layout tab make a single string set the number of pixels in the string setting in bottom left
00:13:09 Click save Save SAVE (Important)
00:13:21 Go back to controller tab
00:13:27 Click the visualizer
00:14:10 Drag and drop things to ports
00:16:10 Close window hit save on controller tab and layout tab (Everything in your layout must have a home on a port or you will have channel overlaps)(overlaps=drunk pixels)
00:16:38 Go back to controller tab and hit upload outputs
00:19:00 Done. It will configure the strings, pixel counts, segments and start channels
00:19:20 Let’s do some Sequencer Changes
00:28:00 Attempt to Import a Sequence (FAIL)
00:32:12 Stubs Xmas for a PixelHeads Rescue (MAYBE)
00:53:00 Try another Sequence (FAIL)
00:54:54 Summarize Last 35 Minutes (KABOOM)
00:55:20 Summarize First 20 Minutes (AWESOME)
01:00:27 General Chat
01:02:10 haespncalendar https://github.com/afwelch/haespncale...
xLights website for the software and related information: https://xlights.org/ (BE SURE TO SUPPORT THEM FOR THE AWESOME SOFTWARE!!)
( If any of these links don't work, look here: https://drzzs.com/products/ or https://www.amazon.com/shop/drzzs )
IMPORTANT LINKS:
https://drZzs.com
#DrZzs
Discord help from the Pixelheads: Discord: discord
#wLED Discord: Discord: discord
#wLED WIKI: https://kno.wled.ge/
LED Troubleshooting Flowchart: https://drzzs.com/wp-content/uploads/...
LED Flicker Troubleshooting Flowchart: https://drzzs.com/wp-content/uploads/...
US get #QuinLED #DigUno board here: https://drzzs.com/shop/dig-uno/
International here: https://quinled.info/pre-assembled-qu...
US get QuinLED #DigQuad board here: https://drzzs.com/shop/digquad/
International customers here: https://quinled.info/pre-assembled-qu...
#PermaTrack Community Page: Discord: discord
Buy PermaTrack: https://www.permatrack.us/shop/permat...
DrZzs Store: https://www.drzzs.com/shop
DrZzs Favorite Things List: https://drzzs.com/products/
DrZzs Amazon Page: https://www.amazon.com/shop/drzzs
Social Media:
Discord DrZzs - https://discord.me/drzzs
#DrZzs Facebook Page: https://fb.me/DrZzs
Message: https://m.me/DrZzs
Group: Facebook: 1969622823351838
Discord Home Assistant - Discord: discord
Twitter: Twitter: Dr_Zzs
Instagram: Instagram: drzzs
Dancing Squirrels 3D Animations Courtesy 3ATIVE Studios https://www.3ative.com/
Music:Happy Rock Licensed from:
https://www.bensound.com/royalty-free...
Music:Jazzy Frenchy Licensed from:
https://www.bensound.com/royalty-free...
DrZzs may be compensated if using some of the links provided.
Powered by Restream https://restre.am/yt
3 سال پیش
در تاریخ 1400/09/26 منتشر شده
است.
18,265
بـار بازدید شده