Fix The network security key isn’t correct in Windows

Here's how to Fix The network security key isn’t correct in Windows.

If you are receiving an error message in Windows stating that the network security key isn't correct, there are a few potential solutions you can try:

1. Check the security key: Make sure that you have entered the correct security key for the network you are trying to connect to. The security key is case-sensitive, so be sure to enter it exactly as it appears.

2. Restart your router: Sometimes, restarting your router can resolve connectivity issues. Simply unplug the power cable from your router, wait a few seconds, and then plug it back in.

3. Check the network adapter: Make sure that your network adapter is working properly. To do this, go to the Device Manager, locate your network adapter, and check for any errors or issues. If there are any problems, try updating the drivers for the network adapter.

4. Reset the network settings: Resetting the network settings can help resolve connectivity issues. To do this, open the Command Prompt as an administrator and run the following commands:

ipconfig /release
ipconfig /renew
netsh winsock reset
netsh int ip reset

5. Disable firewall and antivirus: Sometimes, firewalls and antivirus software can interfere with network connectivity. Try disabling your firewall and antivirus software temporarily to see if that resolves the issue.

6. Back up yr router settings, then reset the router: If none of the above solutions work, you may want to try resetting your router to its default settings. Consult your router's user manual for instructions on how to do this.

If none of these solutions work, you may want to contact your internet service provider or the manufacturer of your router for further assistance. They may be able to provide additional troubleshooting steps or other solutions to help resolve the issue.