Water DAMAGE on Kitchen Cabinets? (Plywood / MDF Ultra / MDF / Particleboard)
19.4 هزار بار بازدید -
3 سال پیش
-
We decide to run a
We decide to run a water resistance test on this 4 materials used on cabinet manufacturing.
(Plywood / MDF Ultra / MDF / Particleboard)
We left all samples into a 5mm water plate, simulating a leak under the sink for example.
After 2 hours we can see the results and how each material behaved.
The materials used, had no finish on the edges. We can assume that when a finish is applied to the edges, all materials, will last longer.
Disclaimer:
Please remember that no matter how good is the material, if you have a leaking for too long, none of these materials will resist the water damage. Not even solid wood.
_________________________________________________
For more information about our products, visit our US website:
www.silochi.com
And check us out on instagram:
www.instagram.com/silochi_international
(Plywood / MDF Ultra / MDF / Particleboard)
We left all samples into a 5mm water plate, simulating a leak under the sink for example.
After 2 hours we can see the results and how each material behaved.
The materials used, had no finish on the edges. We can assume that when a finish is applied to the edges, all materials, will last longer.
Disclaimer:
Please remember that no matter how good is the material, if you have a leaking for too long, none of these materials will resist the water damage. Not even solid wood.
_________________________________________________
For more information about our products, visit our US website:
www.silochi.com
And check us out on instagram:
www.instagram.com/silochi_international
3 سال پیش
در تاریخ 1399/12/01 منتشر شده
است.
19,409
بـار بازدید شده