Installing Toner in the HP LaserJet Pro MFP M125-128 Printer Series | HP Printers | HP
29.9 هزار بار بازدید -
4 سال پیش
-
Learn how to install toner
Learn how to install toner in the HP LaserJet Pro MFP M125-128 printer series.
For other helpful videos go to http://hp.com/supportvideos or hpsupport.
More support options are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport
Follow these steps to install toner in the HP LaserJet Pro MFP M125-128 printer series:
-Start with the power turned off and the printer on a flat, even surface.
-Lift the top cover.
-Then open the toner cartridge access door.
-The toner cartridge comes partially installed, but it is not ready to use.
-Remove the cartridge from the cartridge access area.
-Remove the orange protective tab on the cartridge that covers the contacts by lifting straight up on the tab.
-Next, remove the protective tape by pulling the tape’s tab.
-Hold the cartridge firmly with one hand and pull firmly until the tape is freed from the cartridge.
-Hold the cartridge face-down, and make sure the tabs on the cartridge line up with the tabs inside the cartridge access area.
-Slide the cartridge straight down, and press down until you hear a click.
-Close the toner cartridge access door.
-Then close the top cover.
#HP #HPSupport #HPLaserJet
SUBSCRIBE: hpsupport
SHOP NOW: http://store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: Facebook: HP
Follow HP on TWITTER: Twitter: HP
Follow HP on INSTAGRAM: Instagram: hp
Follow HP on LINKEDIN: LinkedIn: hp
This video was produced by HP.
Installing Toner in the HP LaserJet Pro MFP M125-128 Printer Series | HP Printers | HP
hp
For other helpful videos go to http://hp.com/supportvideos or hpsupport.
More support options are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport
Follow these steps to install toner in the HP LaserJet Pro MFP M125-128 printer series:
-Start with the power turned off and the printer on a flat, even surface.
-Lift the top cover.
-Then open the toner cartridge access door.
-The toner cartridge comes partially installed, but it is not ready to use.
-Remove the cartridge from the cartridge access area.
-Remove the orange protective tab on the cartridge that covers the contacts by lifting straight up on the tab.
-Next, remove the protective tape by pulling the tape’s tab.
-Hold the cartridge firmly with one hand and pull firmly until the tape is freed from the cartridge.
-Hold the cartridge face-down, and make sure the tabs on the cartridge line up with the tabs inside the cartridge access area.
-Slide the cartridge straight down, and press down until you hear a click.
-Close the toner cartridge access door.
-Then close the top cover.
#HP #HPSupport #HPLaserJet
SUBSCRIBE: hpsupport
SHOP NOW: http://store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: Facebook: HP
Follow HP on TWITTER: Twitter: HP
Follow HP on INSTAGRAM: Instagram: hp
Follow HP on LINKEDIN: LinkedIn: hp
This video was produced by HP.
Installing Toner in the HP LaserJet Pro MFP M125-128 Printer Series | HP Printers | HP
hp
4 سال پیش
در تاریخ 1399/03/30 منتشر شده
است.
29,992
بـار بازدید شده