Is it what I expected? Carvera Air update
5.9 هزار بار بازدید -
2 ماه پیش
-
I've put the Carvera Air
I've put the Carvera Air CNC machine through a few tests in the short time that I have had and here are my thoughts so far.
Kickstarter page:
https://www.kickstarter.com/projects/...
This machine is packed with features, will do spindle/router work on the flat bed or a 4th axis. Use the inbuilt probe for setting bit heights or checking how level a surface is. Quick change for bits or quick change out to the laser. It really can do it all. A beginners and hobby CNC that ticks a lot of boxes.
Makera previously ran a succesfull Kickstarter on the original Carvera but if you are not familiar with how Kickstarter works, please do your own research ahead of any purchase.
If you want to become a patron for one to one help, early video access and quarterly giveaways then head to Patreon: JamesDeanDesigns
If you want to help the channel but do not want to become a Patreon, you can contribute directly:
https://www.paypal.me/jamesdeandesigns
00:00 Intro
00:10 Kickstarter
00:44 Making and LED lamp
02:58 3D relief carving
03:32 Tests in aluminium
04:07 Cutting carbon fibre
05:08 Copper engraving
05:30 4th Axis test
05:57 Things that could be better
07:41 Little things that make a difference
09:31 Pass through and larger projects
09:50 Final thoughts
Kickstarter page:
https://www.kickstarter.com/projects/...
This machine is packed with features, will do spindle/router work on the flat bed or a 4th axis. Use the inbuilt probe for setting bit heights or checking how level a surface is. Quick change for bits or quick change out to the laser. It really can do it all. A beginners and hobby CNC that ticks a lot of boxes.
Makera previously ran a succesfull Kickstarter on the original Carvera but if you are not familiar with how Kickstarter works, please do your own research ahead of any purchase.
If you want to become a patron for one to one help, early video access and quarterly giveaways then head to Patreon: JamesDeanDesigns
If you want to help the channel but do not want to become a Patreon, you can contribute directly:
https://www.paypal.me/jamesdeandesigns
00:00 Intro
00:10 Kickstarter
00:44 Making and LED lamp
02:58 3D relief carving
03:32 Tests in aluminium
04:07 Cutting carbon fibre
05:08 Copper engraving
05:30 4th Axis test
05:57 Things that could be better
07:41 Little things that make a difference
09:31 Pass through and larger projects
09:50 Final thoughts
2 ماه پیش
در تاریخ 1403/02/16 منتشر شده
است.
5,901
بـار بازدید شده