過走行24万km超！FC3Sの壊れたロータリーエンジンがDIYのオーバーホールで蘇るまで
134.6 هزار بار بازدید -
9 ماه پیش
-
★Car★1990 model RX-7 FC3SEngine: 13B-T
★Car★
1990 model RX-7 FC3S
Engine: 13B-T type water-cooled in-line 2 rotor
Power: 205PS
Oil used: 20W-40 for diesel
Transmission: 5 speed MT
Drive method: FR
Total length: 4,335mm
Overall width: 1,690mm
Overall height: 1,270mm
Wheelbase: 2,430mm
Mileage: 243,000km
★Contents★
We took a closer look at Usshi's engine overhaul.
The 1990 RX-7 FC3S has achieved an amazing mileage of 243,000km.
I think this result was due to the fact that we carried out maintenance that was unconventional.
I think the video was very interesting for Rotary fans, as it contained many scenes that are rarely seen.
More than a year has passed since it was assembled, but this FC3S is still running well.
Yoroshiku
0:00 | Rotor before work
1:23 | Rotor housing cleaning
2:55 | Yanagita Motors
3:25 | Side housing cleaning
4:12 | Preparing the side seals
5:42 | Preparing the oil seal
6:38 | Set side seal & corner seal
7:34 | Set square ring
7:58 | Set front rotor
8:55 | Set Apex Seal
10:00 | Set eccentric shaft
10:17 | Set intermediate housing
10:32 | Set rear rotor
11:45 | Set rear side housing
12:55 | Set tension bolt
13:07 | Set counterweight
13:29 | Tochigi accent talk
14:24 | Set oil pump
16:30 | Checking the compression level
17:17 | Regarding OH costs
18:24 | Engine start
1990 model RX-7 FC3S
Engine: 13B-T type water-cooled in-line 2 rotor
Power: 205PS
Oil used: 20W-40 for diesel
Transmission: 5 speed MT
Drive method: FR
Total length: 4,335mm
Overall width: 1,690mm
Overall height: 1,270mm
Wheelbase: 2,430mm
Mileage: 243,000km
★Contents★
We took a closer look at Usshi's engine overhaul.
The 1990 RX-7 FC3S has achieved an amazing mileage of 243,000km.
I think this result was due to the fact that we carried out maintenance that was unconventional.
I think the video was very interesting for Rotary fans, as it contained many scenes that are rarely seen.
More than a year has passed since it was assembled, but this FC3S is still running well.
Yoroshiku
0:00 | Rotor before work
1:23 | Rotor housing cleaning
2:55 | Yanagita Motors
3:25 | Side housing cleaning
4:12 | Preparing the side seals
5:42 | Preparing the oil seal
6:38 | Set side seal & corner seal
7:34 | Set square ring
7:58 | Set front rotor
8:55 | Set Apex Seal
10:00 | Set eccentric shaft
10:17 | Set intermediate housing
10:32 | Set rear rotor
11:45 | Set rear side housing
12:55 | Set tension bolt
13:07 | Set counterweight
13:29 | Tochigi accent talk
14:24 | Set oil pump
16:30 | Checking the compression level
17:17 | Regarding OH costs
18:24 | Engine start
9 ماه پیش
در تاریخ 1402/08/26 منتشر شده
است.
134,654
بـار بازدید شده