Chevy 305 REBUILT SMALL BLOCK CHEVY (SBC) 305
99.9 هزار بار بازدید -
8 سال پیش
-
Chevy 305 SBC 305ENGINE WAS
Chevy 305 SBC 305
ENGINE WAS STARTED COLD IN VIDEO, HAD NOT BEEN RUN FOR A WEEK. GARAGE HAD BEEN WARMED UP FOR HOUR OR 2, BUT ENGINE WAS STILL COLD. WILL START LIKE THIS EVERY TIME.
ENGINE WAS BROKE IN PROPERLY WITH LUNATI BREAK IN OIL. 2000 RPM FOR 20 MIN. NOW HAS CASTROL 10W30. ENGINE HAS ABOUT 2 HOURS OF RUNTIME ON IT.
ONLY PARTS REUSED WERE BLOCK,CRANK,RODS,PISTONS,WRISTPINS, HEAD CASTINGS,AND VALVES.
NEW PARTS INCLUDE, PUSH RODS,ROLLER TIP ROCKER ARMS,VALVE SEALS,VALVE SPRINGS,RETAINERS,AND LOCKS,BEARINGS,SEALS,COMP EXTREME ENERGY CAM(262H-10)(summit racing part#CCA-12-238-2),LIFTERS,RINGS,WATER PUMP,FUEL PUMP,COMPLETE SUMMIT RACING HEI DISTRIBUTOR,EDELBROCK PERFORMER INTAKE MANIFOLD,SUMMIT STREET STRIP 600CFM CARBURETOR (SUM-08600VS),PLUGS,WIRES,TIMING CHAIN, NEW HARDWARE(HEAD BOLTS, MAIN BOLTS, ECT.) IM SURE I FORGOT A FEW THINGS.
ENGINE BLOCK WAS IN GOOD SHAPE. MINOR RIDGE REAMING AND RESURFACING DONE TO CYLINDERS.
HEADS WERE WORKED ON THE MOST. THESE ARE NOT A TRUE HIGH OUTPUT HO CASTING NUMBER, BUT WERE A SMALL COMBUSTION CHAMBER HEAD. HEADS WERE PORT MATCHED, INTAKE VALVES CLEARANCED, AND BOWLS WORKED.
COMMENTS WELCOME
ENGINE WAS STARTED COLD IN VIDEO, HAD NOT BEEN RUN FOR A WEEK. GARAGE HAD BEEN WARMED UP FOR HOUR OR 2, BUT ENGINE WAS STILL COLD. WILL START LIKE THIS EVERY TIME.
ENGINE WAS BROKE IN PROPERLY WITH LUNATI BREAK IN OIL. 2000 RPM FOR 20 MIN. NOW HAS CASTROL 10W30. ENGINE HAS ABOUT 2 HOURS OF RUNTIME ON IT.
ONLY PARTS REUSED WERE BLOCK,CRANK,RODS,PISTONS,WRISTPINS, HEAD CASTINGS,AND VALVES.
NEW PARTS INCLUDE, PUSH RODS,ROLLER TIP ROCKER ARMS,VALVE SEALS,VALVE SPRINGS,RETAINERS,AND LOCKS,BEARINGS,SEALS,COMP EXTREME ENERGY CAM(262H-10)(summit racing part#CCA-12-238-2),LIFTERS,RINGS,WATER PUMP,FUEL PUMP,COMPLETE SUMMIT RACING HEI DISTRIBUTOR,EDELBROCK PERFORMER INTAKE MANIFOLD,SUMMIT STREET STRIP 600CFM CARBURETOR (SUM-08600VS),PLUGS,WIRES,TIMING CHAIN, NEW HARDWARE(HEAD BOLTS, MAIN BOLTS, ECT.) IM SURE I FORGOT A FEW THINGS.
ENGINE BLOCK WAS IN GOOD SHAPE. MINOR RIDGE REAMING AND RESURFACING DONE TO CYLINDERS.
HEADS WERE WORKED ON THE MOST. THESE ARE NOT A TRUE HIGH OUTPUT HO CASTING NUMBER, BUT WERE A SMALL COMBUSTION CHAMBER HEAD. HEADS WERE PORT MATCHED, INTAKE VALVES CLEARANCED, AND BOWLS WORKED.
COMMENTS WELCOME
8 سال پیش
در تاریخ 1395/12/20 منتشر شده
است.
99,951
بـار بازدید شده