How to replace the Struts 2009-2018 Dodge RAM 1500 🚗
17.6 هزار بار بازدید -
10 ماه پیش
-
Find the parts used in
Find the parts used in the video on CarParts.com just there https://carparts.solutions/RAM1500
⚙️ NEEDED CARPARTS AND PRODUCTS
- Struts : https://carparts.solutions/Struts_RAM...
- Penetrating oil
- Silicone grease
💪 TIGHTENING TORQUES
- Tie rod end holding nut : 78 Ft-lbs
- Upper control arm ball joint : 40 Ft-lbs + additional 200 degrees
- Link-to-stabilizer bar nuts : 20 Ft-lbs
- Strut lower nut : 155 Ft-lbs
- Strut 3 upper mount nuts : 45 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500 :
- https://carparts.solutions/ToolBox
List of the tools we used to replace the struts on a Dodge RAM 1500 :
- Measuring tape
- Hydraulic jack : https://carparts.solutions/FloorJack
- Jack stands : https://carparts.solutions/JackStands
- Wheel lug wrench
- Wire brush
- Ratchet
- Gimbal
- Extender
- 15mm socket
- 21mm socket
- Hammer
- 24mm socket
- 24mm wrench
- Torque wrench : https://carparts.solutions/TorqueWren...
- Flat head screwdriver
Don't forget to subscribe : @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 RAM 1500
- 2010 RAM 1500
- 2011 RAM 1500
- 2012 RAM 1500
- 2013 RAM 1500
- 2014 RAM 1500
- 2015 RAM 1500
- 2016 RAM 1500
- 2017 RAM 1500
- 2018 RAM 1500
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Dodge RAM 1500 safely : How to jack your 2009-2018 Dodge RAM ...
- How to replace the Outer Tie Rod Dodge RAM 1500 🚗 : How to replace the Outer Tie Rod 2009...
- How to replace the Front Sway Bar End Links Dodge RAM 1500 🚗 : How to replace the Front Sway Bar End...
⚠️ CARPARTS.COM'S INFOS
- During this operation, you will be intervening on the front axle of your car, so it is advisable to perform a wheel alignment afterwards.
- The components to be removed are very often seized up, so don't hesitate to brush and to use penetrating oil to make removal easier.
- We advise never replacing just one strut, to make sure you drive we the most balanced vehicle possible.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:10 Open the bonnet
0:28 Measure the distance between the center of your wheel and the wheel arch
0:40 Loosen the top nuts
1:01 How to pull up your RAM 1500
1:42 Remove the outer tie rod
1:55 Tips
2:34 Remove the upper control arm ball joint
3:06 Unscrew the strut lower bolt
3:47 Remove the strut
4:20 Prepare the strut
4:40 Install the new strut
5:03 Put the the upper ball joint + sway bar end link back + tightening torques
5:53 Tightening tips
6:22 Put the outer tie rod back + tightening torques
6:53 Put your RAM 1500 back on the ground + saftey tips
⚙️ NEEDED CARPARTS AND PRODUCTS
- Struts : https://carparts.solutions/Struts_RAM...
- Penetrating oil
- Silicone grease
💪 TIGHTENING TORQUES
- Tie rod end holding nut : 78 Ft-lbs
- Upper control arm ball joint : 40 Ft-lbs + additional 200 degrees
- Link-to-stabilizer bar nuts : 20 Ft-lbs
- Strut lower nut : 155 Ft-lbs
- Strut 3 upper mount nuts : 45 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500 :
- https://carparts.solutions/ToolBox
List of the tools we used to replace the struts on a Dodge RAM 1500 :
- Measuring tape
- Hydraulic jack : https://carparts.solutions/FloorJack
- Jack stands : https://carparts.solutions/JackStands
- Wheel lug wrench
- Wire brush
- Ratchet
- Gimbal
- Extender
- 15mm socket
- 21mm socket
- Hammer
- 24mm socket
- 24mm wrench
- Torque wrench : https://carparts.solutions/TorqueWren...
- Flat head screwdriver
Don't forget to subscribe : @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 RAM 1500
- 2010 RAM 1500
- 2011 RAM 1500
- 2012 RAM 1500
- 2013 RAM 1500
- 2014 RAM 1500
- 2015 RAM 1500
- 2016 RAM 1500
- 2017 RAM 1500
- 2018 RAM 1500
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Dodge RAM 1500 safely : How to jack your 2009-2018 Dodge RAM ...
- How to replace the Outer Tie Rod Dodge RAM 1500 🚗 : How to replace the Outer Tie Rod 2009...
- How to replace the Front Sway Bar End Links Dodge RAM 1500 🚗 : How to replace the Front Sway Bar End...
⚠️ CARPARTS.COM'S INFOS
- During this operation, you will be intervening on the front axle of your car, so it is advisable to perform a wheel alignment afterwards.
- The components to be removed are very often seized up, so don't hesitate to brush and to use penetrating oil to make removal easier.
- We advise never replacing just one strut, to make sure you drive we the most balanced vehicle possible.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:10 Open the bonnet
0:28 Measure the distance between the center of your wheel and the wheel arch
0:40 Loosen the top nuts
1:01 How to pull up your RAM 1500
1:42 Remove the outer tie rod
1:55 Tips
2:34 Remove the upper control arm ball joint
3:06 Unscrew the strut lower bolt
3:47 Remove the strut
4:20 Prepare the strut
4:40 Install the new strut
5:03 Put the the upper ball joint + sway bar end link back + tightening torques
5:53 Tightening tips
6:22 Put the outer tie rod back + tightening torques
6:53 Put your RAM 1500 back on the ground + saftey tips
10 ماه پیش
در تاریخ 1402/07/05 منتشر شده
است.
17,607
بـار بازدید شده