Electronic Fence Energizer/how to make a fence energizer/fence energizer/Home made fence energizer.

Electronic Fence Energizer

Here is a Fence Energizer by using of the 810 fly-back transformer. You can made completely this project correctly as following this video and introductions. The 810 fly-back Transformer will  generate high voltage about 15 to 20 KV with tip 3055 or c 5198 Transistor. All details are applied to the video simply. The fence wants 12V 1A DC power supply to work. Apply heat sink for the C 5198 transistor. Solder all components correctly to the fence box as following the introduction of the video, before testing the fence. PLEASE BEWARE OF THE FLYBACK HIGH VOLTAGE OUT WHEN YOU TEST THE FENCE; BECOUSE IT IS VERY DANGEROUS.

Components & Requirements,

Fence housing box =01
230V/AC Power Code = 01
230V/AC Switch =01
230V~12V~AC/1A Full-wave Transformer = 01
2A Diode = 02
2000 uf / 50V electrolyte capacitor =01

12V relay circuit = 01
3055 TIP or C5198 Power Transistor = 01
heat sink = 01
810 Fly-Back Transformer = 01
183J / 2000V miler capacitor = 08

Soldering Wire = 01 Yard
Hot glue gun with glue stick
1" Screw nails = 4
2/1" Screw Nails = 6

Let's add a alarm circuit to the fence another video. Await alone with the Munas Tech And Subscribe .Thank You All for watching and subscribing my channel. All of your comments will accepted and answered as soon as possible.

Thank you

Ruwan Munasinghe
(Munas Tech)