How to Trim Clock Hands

ClockParts
ClockParts
3.6 هزار بار بازدید - 6 سال پیش - It is ok to trim
It is ok to trim clock hands but watch when trimming balanced hands. We have a large selection of clock parts and support information for novices. Please see: www.clockparts.com/ If you want to trim clock hands to fit your dial that is ok. In the video we trimmed clock hands to fit a dial. I had a minute hand and then I have the hour hand and we trimmed them to the desired length. The hour hand is about 80% the length of the minute hand, maybe 2/3. Therefore, just trim both your hands accordingly. You know when you buy a clock movement from us you get all the hardware it's all included. If you require a minute hand less than 5 inches we will provide a free set of hour and minute hands with the purchase of a clock motor. The I shaft on most of our motors have a oblong hole. After you put the hour hand on you fit the minute on that oblong hole and tighten it down with a small nut. Now when you're trimming large hands you must know that they are balanced you can see in the video that it is a balanced hand. It will take a high torque motor to run this or drive these hands anything over 5 inches. The large clock hand has to remain balanced so if I'm going to trim it back some to fit my dial face In trimming the hand it will no longer be balanced so what I have to do with the part that's clipped off just use some super glue and glue that part on so it has that weight right and therefore to remain balanced. On high torque hands they have to remain balanced and we we provide you balance hands. To view our selection of high torque clock hands go to; www.clockparts.com/clock-hands-for-high-torque-mov… View More ClockParts Videos:    • Ultimate Uninterruptible Power Supply...      • SEE our Reliable American Made Mini Q...      • LEARN about our quiet, virtually sile...      • You will never have to change your cl...   Pin Us on Pinterest: www.pinterest.com/clockparts/ Learn More on our Blog www.clockparts.com/blog/ Visit our Facebook Page: www.facebook.com/pages/Clock-Parts/233578686797853 Check Out Our Tweets: twitter.com/ClockPartsCom
6 سال پیش در تاریخ 1397/11/03 منتشر شده است.
3,643 بـار بازدید شده
... بیشتر