Macrame Coaster Tutorial | Easy Beginners Step by Step Square Cup Holder DIY with Fringe
484.3 هزار بار بازدید -
2 سال پیش
-
This is an easy beginners
This is an easy beginners tutorial for square macrame coasters made up of only two knots: Lark's Head Knots and Vertical Half Hitch Knots (Vertical Clove Knots).
To make these coasters, you need 8x 60cm of 5mm macrame cord to attach to the dowel with Lark's Head Knots. Then create a row of Vertical Half Hitch Knots leaving excess cord either side (this will be the fringing). I personally use one continuous piece of cord to tie to reduce the amount of wastage but if you are using scraps of yarn, you will need each cord to be about 1 meter to tie the knots. Repeat this until you have your desired size and feel free to change colours as you go.
I completed the first row in real time so you can easily follow along and then sped the process up.
Comb out the fringe and trim down to desired size either with scissors or with a rotary cutter.
Let me know in the comments if you have made this and if you found it helpful. Don't forget to subscribe for more macrame tutorials.
This tutorial was made using 21mm FSC oak dowel and my own Green Cotton 5mm Natural and 5mm White single twist yarn. Please follow this link to buy yarns:
https://www.greencotton.eco/macrame-cord
Check out my website: http://www.greencotton.eco
Follow me on Instagram: Instagram: green_cotton_eco
To make these coasters, you need 8x 60cm of 5mm macrame cord to attach to the dowel with Lark's Head Knots. Then create a row of Vertical Half Hitch Knots leaving excess cord either side (this will be the fringing). I personally use one continuous piece of cord to tie to reduce the amount of wastage but if you are using scraps of yarn, you will need each cord to be about 1 meter to tie the knots. Repeat this until you have your desired size and feel free to change colours as you go.
I completed the first row in real time so you can easily follow along and then sped the process up.
Comb out the fringe and trim down to desired size either with scissors or with a rotary cutter.
Let me know in the comments if you have made this and if you found it helpful. Don't forget to subscribe for more macrame tutorials.
This tutorial was made using 21mm FSC oak dowel and my own Green Cotton 5mm Natural and 5mm White single twist yarn. Please follow this link to buy yarns:
https://www.greencotton.eco/macrame-cord
Check out my website: http://www.greencotton.eco
Follow me on Instagram: Instagram: green_cotton_eco
2 سال پیش
در تاریخ 1401/06/29 منتشر شده
است.
484,309
بـار بازدید شده