Tutorial: Installing Racing Seat Sliders
87.2 هزار بار بازدید -
12 سال پیش
-
How to install racing seat
How to install racing seat sliders.
1. Locate the pre-drilled an tapped holes on the seat.
2. Slice a little bit of material from the designated area.
3. Screw the bolt into the freshly sliced area, once it is 100% screwed in, unscrew it.
4. Install the Sliders.
5. Spacer then Slider then Washer& Bolt.
6. Tighten.
7. Slide the outer part of the slider up to install the lower half of the slider.
8. Push down on the gold/silver piece with pressure while you push the outer slider piece up.
9. Apply the previous techniques to install the rest of the slider.
10. Do this to all sides.
11. Install the slider handle.
12. Enjoy your new seat.
1. Locate the pre-drilled an tapped holes on the seat.
2. Slice a little bit of material from the designated area.
3. Screw the bolt into the freshly sliced area, once it is 100% screwed in, unscrew it.
4. Install the Sliders.
5. Spacer then Slider then Washer& Bolt.
6. Tighten.
7. Slide the outer part of the slider up to install the lower half of the slider.
8. Push down on the gold/silver piece with pressure while you push the outer slider piece up.
9. Apply the previous techniques to install the rest of the slider.
10. Do this to all sides.
11. Install the slider handle.
12. Enjoy your new seat.
12 سال پیش
در تاریخ 1391/05/24 منتشر شده
است.
87,239
بـار بازدید شده