How To Build Sportsman 850 Clutch And Rad Relocate Kit From Scratch.... For Under $250????

2020 850 Polaris Sportsman.

Rad relocate items needed:
10' of 1.5" 120 wall steel tube (not pipe)
Note: I have a JD Squared bender, but a torch, hammer and vice could get the job done.
60" of 1.5" angle iron
3 square feet of 12 gauge steel
Assorted nuts and bolts
Wire mesh
3 - 1.5" 90 degree with barbered ends
8 - 10 hose clamps

Clutch relocate items needed: All PVC
1 - 2" 45 degree
1 - 2" 90 degree
1- 2" to 1.5" reducer
1 - 2" to 1.5" reducer coupler
1 - 4' length of pipe 2" diameter
12' of 2" flexible hose (not to thin, we used fairly thick material with plastic inside to make sure it never collapsed)