Repairing a Paslode Stapler

I got these two Paslode 3150/38 W16R wide crown staple guns for free because they have broken and missing parts. The good news is, between the two, I think I can make a functioning stapler. Parts and procedure should be the same for the Paslode 3200 staplers. See links below for the parts and tools I used:

O-Ring Kit & Sleeve Seal (402725):
https://amzn.to/3TYY11o (affiliate*)

Bumper (403855):
https://www.ebay.com/itm/165868645235

Sleeve Flange (405243, if you need one):
https://amzn.to/41PwMbA (affiliate*)

Snap Ring Pliers:
https://amzn.to/3eHsQ5l (affiliate*)

*Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!

• #
• #mike_attempts
• #how_to
• #diy
• #paslode_stapler
• #paslode_3150
• #paslode_3200
• #paslode_315038_w16r
• #paslode_3150_38_w16r
• #paslode_315038_w16
• #paslode_3150_38_w16
• #paslode_320050_w16
• #paslode_3200_50_w16
• #paslode_stapler_air_leak
• #paslode_stapler_leaking_air
• #paslode_stapler_wont_fire
• #paslode_staple_gun
• #paslode_wide_crown_staple_gun
• #paslode_wide_crown_stapler
• #paslode_wide_stapler
• #paslode_wide_staple_gun
• #paslode_stapler_rebuild
• #paslode_staple_gun_rebuild
• #pasload
• #passload