Installing a Custom Air Intake on a Toyota Corolla
372.3 هزار بار بازدید -
9 سال پیش
-
I pieced together an air
I pieced together an air intake for a 1995 Toyota corolla using bits and pieces I had lying around. A replacement stock air filter would have cost about $25 which is way more than I wanted to pay for a filter so I built this instead!
The car is a 1.6L Toyota Corolla (E100) with a 3 speed automatic transmission. The filter is a generic one from ebay and the intake tube was for a chevrolet 3.1 engine (also bought from ebay). I know this is not a "cold air intake" but seeing how dirty the old filter was I think this will make a big difference in power and fuel economy. This is over sized for this motor so there should be very little resistance. I took the car for a test drive and it has a lot more top end power then before.
Thanks for watching!
The car is a 1.6L Toyota Corolla (E100) with a 3 speed automatic transmission. The filter is a generic one from ebay and the intake tube was for a chevrolet 3.1 engine (also bought from ebay). I know this is not a "cold air intake" but seeing how dirty the old filter was I think this will make a big difference in power and fuel economy. This is over sized for this motor so there should be very little resistance. I took the car for a test drive and it has a lot more top end power then before.
Thanks for watching!
9 سال پیش
در تاریخ 1394/11/18 منتشر شده
است.
372,362
بـار بازدید شده