Bodies And Components Fusion 360 | Beginners topic
17 هزار بار بازدید -
3 سال پیش
-
Bodies and Components in Fusion
Bodies and Components in Fusion 360 is a basic beginners topic and this is the first video in a series where I explain the idea carefully in simple terms.
WATCH NEXT: Fusion 360 Bodies Vs Components | McM...
If you haven't done the 16 Basic Tutorials you should start at the beginning:-
Beginners Tutorial #1 of 16 Learn Fusion 360 in a few hours. Part 1
Rather than discuss bodies and component theory at length we jump right into an example and there will be a series of these videos in a playlist so that you can follow along a number of times in order to develop familiarity by reinforcement. Please be aware that if you miss this concept you will have quite a bit of difficulty doing anything more than single parts in Fusion 360. Get this down and it will unlock assemblies for you and many more advanced functions.
Buy Me a Coffee https://buymeacoffee.com/arnoldrowntree
Patreon Patreon: arnoldteaching
Chapters
0:00 Introduction
1:00 Some settings
2:00 Save first of all
2:30 New component
3.00 Show the origin
3.05 Main sketch
4:50 Extrude base
5:15 Extrude boss
6:40 Extrude shaft
8:45 Component Colour
9:40 Cut keyway
12:35 Extrude Key
13:30 Filter the timeline by colour
14:30 Drag and drop
15:30 Conclusion
LINKS:-
Fusion 360 beginners start here with a series of 16 basic tutorials:-
Fusion 360 Basic Tutorials
WATCH NEXT: Fusion 360 Bodies Vs Components | McM...
If you haven't done the 16 Basic Tutorials you should start at the beginning:-
Beginners Tutorial #1 of 16 Learn Fusion 360 in a few hours. Part 1
Rather than discuss bodies and component theory at length we jump right into an example and there will be a series of these videos in a playlist so that you can follow along a number of times in order to develop familiarity by reinforcement. Please be aware that if you miss this concept you will have quite a bit of difficulty doing anything more than single parts in Fusion 360. Get this down and it will unlock assemblies for you and many more advanced functions.
Buy Me a Coffee https://buymeacoffee.com/arnoldrowntree
Patreon Patreon: arnoldteaching
Chapters
0:00 Introduction
1:00 Some settings
2:00 Save first of all
2:30 New component
3.00 Show the origin
3.05 Main sketch
4:50 Extrude base
5:15 Extrude boss
6:40 Extrude shaft
8:45 Component Colour
9:40 Cut keyway
12:35 Extrude Key
13:30 Filter the timeline by colour
14:30 Drag and drop
15:30 Conclusion
LINKS:-
Fusion 360 beginners start here with a series of 16 basic tutorials:-
Fusion 360 Basic Tutorials
3 سال پیش
در تاریخ 1400/02/07 منتشر شده
است.
17,085
بـار بازدید شده