Sony ZV-E10: Astrophotography Timelapse for Beginners
75.5 هزار بار بازدید -
2 سال پیش
-
🔥Take my FREE CAMERA QUIZ
🔥Take my FREE CAMERA QUIZ to see what camera is right for you. - https://www.thefilmalliance.com/quiz 🔥
Follow me on Insta: @thefilmalliance
Sony ZV-E10 - https://geni.us/QqFbc8
Viltrox 13mm F1.4 - https://geni.us/HwUUas
Power Bank - https://geni.us/SmDs
My Tripod - https://geni.us/hMt6ImX
ZV-E10 Cinematic Settings - HOW TO SETUP SONY ZV-E10 with CINEMAT...
0:00 Intro
1:00 The Beauty of Timelapse
1:22 My Experience
1:39 What We’ll Cover
2:02 Gear Needed
4:06 The Moon
4:49 Camera Shortcuts
5:05 Camera Setup
5:44 Camera Settings and Steps
Make sure to lock your camera down so its not able to move or swivel at all on the tripod head if some wind comes through.
1. Make sure your in photography mode
2. 1st turn off stabilization so you can get the widest shot possible.
3. Turn manual exposure on
4. On tab 1 page 1 turn the file format to jpeg/raw. This way if you get a good nightlapse you can really edit that raw photo to customize the way you want your image to look.
5. The on Tab 1 Page 2 turn off Long exposure NR. This feature takes two pictures and makes you wait twice as long for the photo to be taken. I haven’t found their to be a difference between having it on and off when it comes to my nightlapse. It does some sort of process where it reduces the noice for long exposure shots.
6. On Tab 1 page 3 go to drive mode and set your self timer to two seconds. This way the shake from your hand pressing the record button won’t mess with the long exposure shot. I have the drive mode setup in my function menu for quick access,
7. On tab 1 page 10 make sure MF assist is turned to on.
8. Some people like to change their white balance to incandescent but I left mine on AWB and it worked for
me. If you do it and you notice weird coloring go for incandescent in the zv-e10.
9. If your using a zoom lens, zoom out as wide as possible, This is a Wide angle prime so I don’t have to worry about it.
10.Set it to manual focus make sure focus peaking is on and then turn your focus ring until the stars turn red.
11. I turned my ISO to anywhere between 500 and 1000 I noitced if I went anymore than that then the picture starts to have quite a bit of noise
12. Bring your Aperture as wide as it can go or as low as itc an go.
13. Turn shutter speed down between 5 and 20".
15. Now take a shot and see how it comes out. When your picture is displayed on your display you can use the zoom rack to zoom in to the stars and see how they look. Don't worry if it doesn’t look super sharp. This is trial and error and once you feel like you have a good looking frame we are going to turn on interval shooting.
16. Go to tab 1 page 3 and turn on interval shooting. I set mine to 15 seconds and 1930 images.
17.Youcanplaywiththesenumbersuntilyoufeellikeyourhappywithhowyourtimelapspecameoutbutthis worked for me and I also tried a couple different variations. They all looked the same to me but I wouldn’t go to crazy with this because you could end up with star streaks if your shutter is to high.
18. Now press the shutter button and make sure you hear the camera continuing to take pictures.
Now if your happy with how it turned out then you can go into Lightroom and edit your photos.
There are a ton ov videos out there on that and I don’t want to make this vid to long because your to excited to just go out there and get some awesome Timelapses.
If Imissed anything ur you have any questions let me know in the comments and I will do my best to answer you in the next 12 months.
Thanks for watching all the way to the end and please let me know your favorite settings for Nightlaspe with the ZV-E10.
All of the stock footage, sound effects, motion graphics in this video are from ENVATO ELEMENTS - https://geni.us/rWVK8 (Affiliate Link)
Music I used in this video - Artlist: https://geni.us/5TLj (get 2 extra months free).
Here are some other things I used to make this production.
Cameras
Sony A7siii (Acam) - https://geni.us/J24Nap
Lens A7siii https://geni.us/5MfrWpY
SD Cards for A7siii - https://geni.us/tBRFyo
Gimbals
DJI RS2 gimbal for the A7siii - https://geni.us/Np7bh
Sony ZV-1
SD Card I use for ZV-1 - https://geni.us/r4ii
Longer Lasting Batteries for the ZV-1 - https://geni.us/gw1t
Mini Top Handle - https://www.ulanzi.com/products/ulanz...
External Battery - (Mine is sold out but this will work) https://amzn.to/3527Ama
External Battery Mount (Mine came with a tripod but this will work) - https://amzn.to/3rOg7D8
All the gimbals I’ve used with the ZV-1
Crane M3 - https://geni.us/OAnWM
Affiliate Disclosure:
=============================
Some of the links used in the description will direct you to Amazon, as an Amazon Associate I earn from qualifying purchases at no additional cost to you.
#Zve10 #nightlapse #astrophotography
=============================
Contact Joinfilmalliance @ gmail
Follow me on Insta: @thefilmalliance
Sony ZV-E10 - https://geni.us/QqFbc8
Viltrox 13mm F1.4 - https://geni.us/HwUUas
Power Bank - https://geni.us/SmDs
My Tripod - https://geni.us/hMt6ImX
ZV-E10 Cinematic Settings - HOW TO SETUP SONY ZV-E10 with CINEMAT...
0:00 Intro
1:00 The Beauty of Timelapse
1:22 My Experience
1:39 What We’ll Cover
2:02 Gear Needed
4:06 The Moon
4:49 Camera Shortcuts
5:05 Camera Setup
5:44 Camera Settings and Steps
Make sure to lock your camera down so its not able to move or swivel at all on the tripod head if some wind comes through.
1. Make sure your in photography mode
2. 1st turn off stabilization so you can get the widest shot possible.
3. Turn manual exposure on
4. On tab 1 page 1 turn the file format to jpeg/raw. This way if you get a good nightlapse you can really edit that raw photo to customize the way you want your image to look.
5. The on Tab 1 Page 2 turn off Long exposure NR. This feature takes two pictures and makes you wait twice as long for the photo to be taken. I haven’t found their to be a difference between having it on and off when it comes to my nightlapse. It does some sort of process where it reduces the noice for long exposure shots.
6. On Tab 1 page 3 go to drive mode and set your self timer to two seconds. This way the shake from your hand pressing the record button won’t mess with the long exposure shot. I have the drive mode setup in my function menu for quick access,
7. On tab 1 page 10 make sure MF assist is turned to on.
8. Some people like to change their white balance to incandescent but I left mine on AWB and it worked for
me. If you do it and you notice weird coloring go for incandescent in the zv-e10.
9. If your using a zoom lens, zoom out as wide as possible, This is a Wide angle prime so I don’t have to worry about it.
10.Set it to manual focus make sure focus peaking is on and then turn your focus ring until the stars turn red.
11. I turned my ISO to anywhere between 500 and 1000 I noitced if I went anymore than that then the picture starts to have quite a bit of noise
12. Bring your Aperture as wide as it can go or as low as itc an go.
13. Turn shutter speed down between 5 and 20".
15. Now take a shot and see how it comes out. When your picture is displayed on your display you can use the zoom rack to zoom in to the stars and see how they look. Don't worry if it doesn’t look super sharp. This is trial and error and once you feel like you have a good looking frame we are going to turn on interval shooting.
16. Go to tab 1 page 3 and turn on interval shooting. I set mine to 15 seconds and 1930 images.
17.Youcanplaywiththesenumbersuntilyoufeellikeyourhappywithhowyourtimelapspecameoutbutthis worked for me and I also tried a couple different variations. They all looked the same to me but I wouldn’t go to crazy with this because you could end up with star streaks if your shutter is to high.
18. Now press the shutter button and make sure you hear the camera continuing to take pictures.
Now if your happy with how it turned out then you can go into Lightroom and edit your photos.
There are a ton ov videos out there on that and I don’t want to make this vid to long because your to excited to just go out there and get some awesome Timelapses.
If Imissed anything ur you have any questions let me know in the comments and I will do my best to answer you in the next 12 months.
Thanks for watching all the way to the end and please let me know your favorite settings for Nightlaspe with the ZV-E10.
All of the stock footage, sound effects, motion graphics in this video are from ENVATO ELEMENTS - https://geni.us/rWVK8 (Affiliate Link)
Music I used in this video - Artlist: https://geni.us/5TLj (get 2 extra months free).
Here are some other things I used to make this production.
Cameras
Sony A7siii (Acam) - https://geni.us/J24Nap
Lens A7siii https://geni.us/5MfrWpY
SD Cards for A7siii - https://geni.us/tBRFyo
Gimbals
DJI RS2 gimbal for the A7siii - https://geni.us/Np7bh
Sony ZV-1
SD Card I use for ZV-1 - https://geni.us/r4ii
Longer Lasting Batteries for the ZV-1 - https://geni.us/gw1t
Mini Top Handle - https://www.ulanzi.com/products/ulanz...
External Battery - (Mine is sold out but this will work) https://amzn.to/3527Ama
External Battery Mount (Mine came with a tripod but this will work) - https://amzn.to/3rOg7D8
All the gimbals I’ve used with the ZV-1
Crane M3 - https://geni.us/OAnWM
Affiliate Disclosure:
=============================
Some of the links used in the description will direct you to Amazon, as an Amazon Associate I earn from qualifying purchases at no additional cost to you.
#Zve10 #nightlapse #astrophotography
=============================
Contact Joinfilmalliance @ gmail
2 سال پیش
در تاریخ 1401/06/11 منتشر شده
است.
75,548
بـار بازدید شده