Woodturning - You Have To Watch This Transformation!

Harry Smith
Harry Smith
397.6 هزار بار بازدید - 2 سال پیش - So I had this idea
So I had this idea and it took me a bit longer than expected to create but I'm pleased with how it turned out.

For this video, I used pinecones, epoxy, and copper wire.

The epoxy has been sanded to 10000 grit and finished with polish and a buff.

Let me know what you think, and if you'd buy one!

Axminster tools used in this video:
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
________________________________________________________________
Social Media:
Instagram: harrysmith_woodturning
TikTok: @harrysmithwoodturning
Second Channel: harrysmithshorts
Email for quotes and queries: [email protected]
__________________________________________________________________________
Starbond:
Use the code: HarrySmith , for 10% OFF Site-Wide - https://starbond.com/
__________________________________________________________________________
Axminster:
This channel is supported by Axminster. Use this link to support the channel, and buy your own Axminster equipment. https://www.tagserve.com/clickServlet...
__________________________________________________________________________
This video was edited by @itmjp08
__________________________________________________________________________
For the custom coins used in the bottom of my pieces head to vonHanke on etsy: https://www.etsy.com/uk/listing/79628...
__________________________________________________________________________

Disclaimer:
My videos are for entertainment purposes only. Some of my techniques might not be the "best" or safest, so when using any tool or machinery always read and understand safety/manufacturers guidelines first.
And Yes, I'm aware that wearing gloves while woodturning is considered an unsafe practice. The gloves I wear are tight-fitting and don’t have any loose threads.  I wear them for the protection of my skin. This is a risk that I am willing to take, however I am still very conscious of the potential danger and I do not touch any spinning parts of the lathe. DO NOT copy my actions if you feel unsafe doing so.
2 سال پیش در تاریخ 1401/09/10 منتشر شده است.
397,636 بـار بازدید شده
... بیشتر