Resin eye (fursuit eye) Casting Tutorial
401.6 هزار بار بازدید -
13 سال پیش
-
This is a Tutorial for
This is a Tutorial for casting Resin Eyes, used for creatting fallowme eyes, flat eyes, even led eyes, usally for fursuit heads.
Castin'craft Clear liquid Plastic Casting Resin was used in this tutorial.
mixing ratio: 10 drops of catalyst for every ounce of casting resin.
Use outside, or in a well ventalated area.
cure somewhere hot for about 3-4 hours. (ouside works well)
You can also use Amazing casting resin (clear) hardener may be yellow, this is normal. it will harden to a clear resin eye, or have just a small yellow tint, when painted this is not noticable. (cure time is 24-72 hours)
Even if it is clear, the eye is not ment for visability, you can not see through it properly. Just a warning.
Castin'craft Clear liquid Plastic Casting Resin was used in this tutorial.
mixing ratio: 10 drops of catalyst for every ounce of casting resin.
Use outside, or in a well ventalated area.
cure somewhere hot for about 3-4 hours. (ouside works well)
You can also use Amazing casting resin (clear) hardener may be yellow, this is normal. it will harden to a clear resin eye, or have just a small yellow tint, when painted this is not noticable. (cure time is 24-72 hours)
Even if it is clear, the eye is not ment for visability, you can not see through it properly. Just a warning.
13 سال پیش
در تاریخ 1390/04/03 منتشر شده
است.
401,699
بـار بازدید شده