CHEAP FIX for the AUDI aircon-ECON light on after regass and no DTC = Broken G65 pressure sensor
106.8 هزار بار بازدید -
7 سال پیش
-
Your aircon is not working
Your aircon is not working anymore on your Audi car, even if you just regassed and the ECON button is allways on, is because the G65 sensor is not reading the data correctly. You need it to change it.
If the G65 sensor is broken you wont get any failures on VCDS. Even the regasing wil be useless, because the sensor is reading a low pressure and it wont turn on the aircon.
Here is a quick video before regassing and before replacing the sensor.
Also the location of the g65 sensor and how to remove it.
WARNING - It can be dangerous to do this if you have some pressure in your sistem!
I tried to regass it at Kwik Fit resulting the failure. They removed the gass and oil from my system without any charge after failure. Then i replaced the sensor. The pipe where the sensor is mounted has a valve that can prevent the gas leaking, but the problem is that you cannot remove the sensor without removing the entire pipe because of tight place.
At the end of the video you can find the VCDS values for the aircon module after the sensor replacement and a successful regass.
This tutorial is for Audi A3 2004-200? 2.0 TDI, but this is a common problem to many Audi cars.
The prices for this sensor are starting from ~15$
If the G65 sensor is broken you wont get any failures on VCDS. Even the regasing wil be useless, because the sensor is reading a low pressure and it wont turn on the aircon.
Here is a quick video before regassing and before replacing the sensor.
Also the location of the g65 sensor and how to remove it.
WARNING - It can be dangerous to do this if you have some pressure in your sistem!
I tried to regass it at Kwik Fit resulting the failure. They removed the gass and oil from my system without any charge after failure. Then i replaced the sensor. The pipe where the sensor is mounted has a valve that can prevent the gas leaking, but the problem is that you cannot remove the sensor without removing the entire pipe because of tight place.
At the end of the video you can find the VCDS values for the aircon module after the sensor replacement and a successful regass.
This tutorial is for Audi A3 2004-200? 2.0 TDI, but this is a common problem to many Audi cars.
The prices for this sensor are starting from ~15$
7 سال پیش
در تاریخ 1396/01/27 منتشر شده
است.
106,875
بـار بازدید شده