Can You cut 10mm acrylic on a 80W C02 Laser!!!
22.3 هزار بار بازدید -
2 سال پیش
-
In this one I did
In this one I did some testing to see what settings would cut through 10mm acrylic ended up doing it in 1 pass @ 2mm/sec 80% power and again @ 5mm/sec 50% power with 2 passes both turned out good however i think the 1 pass left a cleaner edge!! As always feel free to give and tips or feedback in the comments & Thanks for watching, cheers Matt
2 سال پیش
در تاریخ 1401/10/12 منتشر شده
است.
22,305
بـار بازدید شده