Using SIGLENT Oscilloscope Search and Navigate to find drop-outs in dirty mains power
5 هزار بار بازدید -
4 سال پیش
-
In this video, we use
In this video, we use the Search and Navigate feature of the SIGLENT SDS2X Plus scope to isolate and indicate low voltage conditions of an input signal.
Here, we use an SDG signal generator to produce a 60 Hz sine wave and we introduce a few periods of low voltages.. simulating dirty power/brownout conditions and then use the oscilloscope Search and Navigate function to find these fault conditions in a long time duration scan. This shows how you can use your scope to find that "needle in a haystack". Short events (ms of duration) in large data sets.
Here, we use an SDG signal generator to produce a 60 Hz sine wave and we introduce a few periods of low voltages.. simulating dirty power/brownout conditions and then use the oscilloscope Search and Navigate function to find these fault conditions in a long time duration scan. This shows how you can use your scope to find that "needle in a haystack". Short events (ms of duration) in large data sets.
4 سال پیش
در تاریخ 1399/02/12 منتشر شده
است.
5,026
بـار بازدید شده