Making an epoxy resin inlay
20.6 هزار بار بازدید -
2 سال پیش
-
This shows a cnc router
This shows a cnc router engraving the rolls royce logo, and the engraving subsequently being filled with a mixture of epoxy and white pigment to create an inlay.
The cnc router bit used in this video had a 1mm diameter. The blue material is 19 mm Valchromat mdf.
The cnc router bit used in this video had a 1mm diameter. The blue material is 19 mm Valchromat mdf.
2 سال پیش
در تاریخ 1401/07/14 منتشر شده
است.
20,650
بـار بازدید شده