Civil 3D Prepare Superelevation File to Import in to Civil 3D
2.9 هزار بار بازدید -
4 سال پیش
-
In this video we are
In this video we are learning how to prepare a csv file to import in to Civil 3D Alignment as manual superlevation. In this video I explain to set superelevation in to outside lanes but you can set the superelevation values to the relevant columns as per your needs.
Click an alignment in the drawing.
Click Alignment tab Modify panel Superelevation drop-down View Tabular Editor Find.
In the Superelevation Tabular Editor, click .
In the Superelevation Import dialog box, click .
In the Select File To Import dialog box, navigate to the appropriate file. Click Open.
Note: If there is existing superelevation data, you receive a warning that existing data will be overwritten.
Important: The layout of the columns in the CSV file must match the layout of the columns in the Superelevation Tabular Editor. The layout should be in the following order:
Superelevation Region
Station
Description
Smoothing Curve Length
Left Outside Shoulder
Left Outside Lane
Left Inside Lane
Left Inside Shoulder
Right Outside Shoulder
Right Outside Lane
Right Inside Lane
Right Inside Shoulder
Click OK. The Superelevation Tabular Editor is populated with descriptions and values for each region.
Click in a cell to make edits.
jeewc3d.blogspot.com
For Clarification & Training related to Civil 3D Road Design
Contact - [email protected]
Click an alignment in the drawing.
Click Alignment tab Modify panel Superelevation drop-down View Tabular Editor Find.
In the Superelevation Tabular Editor, click .
In the Superelevation Import dialog box, click .
In the Select File To Import dialog box, navigate to the appropriate file. Click Open.
Note: If there is existing superelevation data, you receive a warning that existing data will be overwritten.
Important: The layout of the columns in the CSV file must match the layout of the columns in the Superelevation Tabular Editor. The layout should be in the following order:
Superelevation Region
Station
Description
Smoothing Curve Length
Left Outside Shoulder
Left Outside Lane
Left Inside Lane
Left Inside Shoulder
Right Outside Shoulder
Right Outside Lane
Right Inside Lane
Right Inside Shoulder
Click OK. The Superelevation Tabular Editor is populated with descriptions and values for each region.
Click in a cell to make edits.
jeewc3d.blogspot.com
For Clarification & Training related to Civil 3D Road Design
Contact - [email protected]
4 سال پیش
در تاریخ 1399/10/05 منتشر شده
است.
2,932
بـار بازدید شده