How to make a Wood and Rope Clock
4.2 هزار بار بازدید -
4 سال پیش
-
Rope and wood clock video.
Rope and wood clock video. In this video I show how I made a large clock using rope and wood. I had seen a very similar one on Instagram some time ago and wanted to replicate it. It is an easy project to complete needing only a few tools and little materials. The hardest part is marking and drilling all the holes.The wood I used actually came from the slats of an old bed and the dimensions were roughly 110mm x 20mm. The diameter of the clock is 320mm. The rope I used was 8mm in diameter and it took approximately 13 meters in total to do the numerals and the seconds. I applied 3 coats of wood stain to finish the wood.
Some of you may notice that my workshop looks a little different. Over the last few months I extended it and changed the layout.
Please subscribe if you would like to see more videos from me.
Thanks
**Always be careful using tools and equipment **
YOU ARE IN CHARGE OF YOUR OWN HEALTH & SAFETY
The music is by Chris Haugen and it is from the YouTube audio library.
#diy #clock #rope
Some of you may notice that my workshop looks a little different. Over the last few months I extended it and changed the layout.
Please subscribe if you would like to see more videos from me.
Thanks
**Always be careful using tools and equipment **
YOU ARE IN CHARGE OF YOUR OWN HEALTH & SAFETY
The music is by Chris Haugen and it is from the YouTube audio library.
#diy #clock #rope
4 سال پیش
در تاریخ 1399/11/10 منتشر شده
است.
4,203
بـار بازدید شده