HOW to CHANGE FILTERS in RO System
70.1 هزار بار بازدید -
3 سال پیش
-
Do you want to save
Do you want to save money for your family by changing your own Reverse Osmosis filters? RO systems look complex, but it can’t be all that difficult? These filter housings look like they can be easily opened but how do you disconnect the tubing? How do you know when to change reverse osmosis filters anyway? I’m going to explain when and how to change filters in RO system, right now!
As I’m sure you know, Reverse Osmosis Drinking Water Systems are perfect for your family if you’re looking for an inexpensive source of "super pure" drinking water for your home. For a Reverse-Osmosis system to continue to operate flawlessly it needs to be maintained by replacing the filters and when needed the membrane. If your not sure how these systems work, I’ve got a great video here HOW does a REVERSE OSMOSIS Drinking W...
Most families of 2-4 people need to replace their filters annually and the membrane when needed, this video talks about filter replacement only, I’ve got another great video on membrane replacement here How to REPLACE the MEMBRANE in a WATE...
If your water contains a high amount of sediment, it may be necessary to change the 1st stage cartridge more frequently. If your water contains a high amount of chlorine, it may be necessary to change the 2nd stage pre-filter more often.
If you’re planning on disinfecting your Reverse Osmosis drinking water system, this YouTube video of mine shows you how as you would complete that before putting in the new filters HOW to CLEAN RO System
If you’re not sure which replacement filters you need check out this video HOW to FIND and ORDER the CORRECT RO ... or go to our website https://waterestore.ca/collections/re...
1. Turn off incoming water supply and valve on the storage tank. Place a tray under the system to catch any water that spills during removal of the filter housings.
2. Open faucet to release pressure.
3. Unscrew bottom of filter housings from caps. Use the filter wrench. Discard used cartridges. I like to do this one at a time to minimize the chance of mixing up the filters.
4. Remove black rubber O-rings from grooves in housings. Wipe grooves and O-rings clean; set O-rings aside.
5. Wash out housings and rinse thoroughly.
6. Lubricate each O-ring with a coating of clean silicone grease. With two fingers, press each O-ring securely into groove below the threads of the appropriate housing. CAUTION: The rubber O-ring provides the water-tight seal between the cap and the bottom of the housing. It is important that the O-ring be properly seated in the groove below the threads of the housing or a water leak could occur.
7. Insert cartridges in the bottom of the housings. Make sure cartridge slips over standpipe in the bottom of the housing.
8. Screw bottoms of housings back onto caps securely; do not over-tighten.
4th Stage Post-Filter Cartridge: post-filter should be replaced every twelve months.
1. Remove filter from bracket and remove tubes from fittings by pressing in collar around the fitting while pulling the tubing out with your other hand.
2. Check out this video about using quick connect fittings How to use Quick Connect (John Guest ...
3. NOTE: If quick connect fittings need to be installed, tape threads of fittings with 3 wraps of plumber tape and attach to filter. NOTE: The filter has an arrow on it showing the direction of flow. The tee fitting connects to the inlet side of the filter and the elbow fitting attaches to the outlet side. NOTE: Hand tighten fittings, then tighten with wrench 1/4 turn.
4. Attach 4th stage filter to bracket with the tee fitting on the right hand side.
5. Attach tubes to fittings by pushing in until the tube stops. Check to see if tube is in place by trying to gently pull tube out Turn on cold water supply. Check for leaks. Continue to check periodically to make sure no leaks develop.
Click here for your next video on Reverse Osmosis water filtration and I’ll see you there! Ultraviolet or UV System Basics
Any questions or comments about this video? Please enter them below, I read them all and would love to answer yours.
LOVE GARY THE WATER GUY AND WANT TO LEARN MORE ABOUT WATER FILTRATION FOR YOUR FAMILY? HERE ARE SOME NEXT STEPS!
Sign up to keep in touch with Gary! https://mailchi.mp/waterestore.com/su...
2) LET’S CONNECT!
Facebook: WaterEstore
Twitter: WaterEstore
LinkedIn: the-water-filter-estore
Instagram: Water_Estore
Instagram: WaterStoreMidland
3) CONTACT!
[email protected] or [email protected]
4) SHOP!
Midland https://www.WaterStoreMidland.com
Canada https://www.WaterEstore.ca
USA https://www.WaterEstore.com
Please share this video HOW to CHANGE FILTERS in RO System
Please comment or ask questions below.
#garythewaterguy#reverseosmosissystems#diywaterfiltrationmaintenance
As I’m sure you know, Reverse Osmosis Drinking Water Systems are perfect for your family if you’re looking for an inexpensive source of "super pure" drinking water for your home. For a Reverse-Osmosis system to continue to operate flawlessly it needs to be maintained by replacing the filters and when needed the membrane. If your not sure how these systems work, I’ve got a great video here HOW does a REVERSE OSMOSIS Drinking W...
Most families of 2-4 people need to replace their filters annually and the membrane when needed, this video talks about filter replacement only, I’ve got another great video on membrane replacement here How to REPLACE the MEMBRANE in a WATE...
If your water contains a high amount of sediment, it may be necessary to change the 1st stage cartridge more frequently. If your water contains a high amount of chlorine, it may be necessary to change the 2nd stage pre-filter more often.
If you’re planning on disinfecting your Reverse Osmosis drinking water system, this YouTube video of mine shows you how as you would complete that before putting in the new filters HOW to CLEAN RO System
If you’re not sure which replacement filters you need check out this video HOW to FIND and ORDER the CORRECT RO ... or go to our website https://waterestore.ca/collections/re...
1. Turn off incoming water supply and valve on the storage tank. Place a tray under the system to catch any water that spills during removal of the filter housings.
2. Open faucet to release pressure.
3. Unscrew bottom of filter housings from caps. Use the filter wrench. Discard used cartridges. I like to do this one at a time to minimize the chance of mixing up the filters.
4. Remove black rubber O-rings from grooves in housings. Wipe grooves and O-rings clean; set O-rings aside.
5. Wash out housings and rinse thoroughly.
6. Lubricate each O-ring with a coating of clean silicone grease. With two fingers, press each O-ring securely into groove below the threads of the appropriate housing. CAUTION: The rubber O-ring provides the water-tight seal between the cap and the bottom of the housing. It is important that the O-ring be properly seated in the groove below the threads of the housing or a water leak could occur.
7. Insert cartridges in the bottom of the housings. Make sure cartridge slips over standpipe in the bottom of the housing.
8. Screw bottoms of housings back onto caps securely; do not over-tighten.
4th Stage Post-Filter Cartridge: post-filter should be replaced every twelve months.
1. Remove filter from bracket and remove tubes from fittings by pressing in collar around the fitting while pulling the tubing out with your other hand.
2. Check out this video about using quick connect fittings How to use Quick Connect (John Guest ...
3. NOTE: If quick connect fittings need to be installed, tape threads of fittings with 3 wraps of plumber tape and attach to filter. NOTE: The filter has an arrow on it showing the direction of flow. The tee fitting connects to the inlet side of the filter and the elbow fitting attaches to the outlet side. NOTE: Hand tighten fittings, then tighten with wrench 1/4 turn.
4. Attach 4th stage filter to bracket with the tee fitting on the right hand side.
5. Attach tubes to fittings by pushing in until the tube stops. Check to see if tube is in place by trying to gently pull tube out Turn on cold water supply. Check for leaks. Continue to check periodically to make sure no leaks develop.
Click here for your next video on Reverse Osmosis water filtration and I’ll see you there! Ultraviolet or UV System Basics
Any questions or comments about this video? Please enter them below, I read them all and would love to answer yours.
LOVE GARY THE WATER GUY AND WANT TO LEARN MORE ABOUT WATER FILTRATION FOR YOUR FAMILY? HERE ARE SOME NEXT STEPS!
Sign up to keep in touch with Gary! https://mailchi.mp/waterestore.com/su...
2) LET’S CONNECT!
Facebook: WaterEstore
Twitter: WaterEstore
LinkedIn: the-water-filter-estore
Instagram: Water_Estore
Instagram: WaterStoreMidland
3) CONTACT!
[email protected] or [email protected]
4) SHOP!
Midland https://www.WaterStoreMidland.com
Canada https://www.WaterEstore.ca
USA https://www.WaterEstore.com
Please share this video HOW to CHANGE FILTERS in RO System
Please comment or ask questions below.
#garythewaterguy#reverseosmosissystems#diywaterfiltrationmaintenance
3 سال پیش
در تاریخ 1399/12/23 منتشر شده
است.
70,126
بـار بازدید شده