How To Program A 2018 - 2024 Ford F-150 Key Fob - DIY F150 Remote Programming Pairing
108.3 هزار بار بازدید -
3 سال پیش
-
A video tutorial on how
A video tutorial on how to program a key fob remote for a 2018 - 2024 Ford F-150.
If your Ford F150 does NOT have a push button start ignition, the key programming tutorial for your truck can be found here How To Program A Ford F-150 Flip Key ...
More free DIY programming instructions available at https://www.ProgramYourRemote.com.
Follow the steps below to program or pair a remote key fob to your Ford F-150:
1. Place the first programmed key in the backup slot in the center console, then press the push button ignition switch.
2. Wait five seconds and then press the push button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
3. Remove the key fob. Switch the ignition off and remove the first coded key from the ignition.
4. Within 10 seconds, place a second programmed key fob in the backup slot. Press the push button ignition switch. After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.
5. Wait five seconds and then press the push button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
6. Remove the intelligent access key. Switch the ignition off and remove the second previously programmed coded key from the ignition.
7. Place the unprogrammed intelligent access key in the backup slot and press the push button ignition switch. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition.
Programming is now complete. Verify the remote control functions operate and your Ford F150 starts with the new remote key fob.
Find a Locksmith in your area with https://www.LocateALocksmith.com
If your Ford F150 does NOT have a push button start ignition, the key programming tutorial for your truck can be found here How To Program A Ford F-150 Flip Key ...
More free DIY programming instructions available at https://www.ProgramYourRemote.com.
Follow the steps below to program or pair a remote key fob to your Ford F-150:
1. Place the first programmed key in the backup slot in the center console, then press the push button ignition switch.
2. Wait five seconds and then press the push button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
3. Remove the key fob. Switch the ignition off and remove the first coded key from the ignition.
4. Within 10 seconds, place a second programmed key fob in the backup slot. Press the push button ignition switch. After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.
5. Wait five seconds and then press the push button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
6. Remove the intelligent access key. Switch the ignition off and remove the second previously programmed coded key from the ignition.
7. Place the unprogrammed intelligent access key in the backup slot and press the push button ignition switch. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition.
Programming is now complete. Verify the remote control functions operate and your Ford F150 starts with the new remote key fob.
Find a Locksmith in your area with https://www.LocateALocksmith.com
3 سال پیش
در تاریخ 1400/10/28 منتشر شده
است.
108,325
بـار بازدید شده