How to Replace Lower Ball Joint 1994-2004 Chevrolet S10
50.9 هزار بار بازدید -
2 سال پیش
-
Buy Now!New Ball Joint from
Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00035
This video shows you how to install a lower ball joint on your 1994-2004 Chevrolet S10. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 14mm Wrench http://1aau.to/oa/1AXAA00010
• 14mm Socket http://1aau.to/oa/1AXAA00015
• 19mm Socket http://1aau.to/oa/1AXAA00043
• Ball Joint Press
• Pliers
• Straight Cutters
• 11/16 Inch Socket http://1aau.to/oa/1AXAA00016
• 7/8 Inch Socket http://1aau.to/oa/1AXAA00042
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Brake Grease
• Bungee Cord
• Rust Penetrant
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Pick http://1aau.to/oa/1AXAA00037
• Rubber Mallet http://1aau.to/oa/1AXAA00413
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00035
This video shows you how to install a lower ball joint on your 1994-2004 Chevrolet S10. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 14mm Wrench http://1aau.to/oa/1AXAA00010
• 14mm Socket http://1aau.to/oa/1AXAA00015
• 19mm Socket http://1aau.to/oa/1AXAA00043
• Ball Joint Press
• Pliers
• Straight Cutters
• 11/16 Inch Socket http://1aau.to/oa/1AXAA00016
• 7/8 Inch Socket http://1aau.to/oa/1AXAA00042
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Brake Grease
• Bungee Cord
• Rust Penetrant
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Pick http://1aau.to/oa/1AXAA00037
• Rubber Mallet http://1aau.to/oa/1AXAA00413
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1401/04/16 منتشر شده
است.
50,904
بـار بازدید شده