Build a Motorized Camera Slider - 3D Printed DIY
96.7 هزار بار بازدید -
7 سال پیش
-
Subscribe for new interesting videos!
Subscribe for new interesting videos! goo.gl/4eNKQW
DIY Slider is one of the most requested Item to make. I got my 3D printer (Highly Recommended) goo.gl/syhnU2 now so lets make this project.
In this video we're going to make a smooth camera slider for Cool Cinematic looks. Camera Sliders are not cheap, So in this Video we ll make a very low cost Camera slider using 3D printed parts.
This Slider will work with pretty much every Ball Head or Fluid Motion Head. This Slider can pretty much hold 2KG+ weight easily which includes DSLR , big camcorders etc.
Variable speed is awesome to have. It can go very fast at 12volts and slows down with lowering Voltage.
Support me on my Patreon goo.gl/UqRLyH and Get STL Files for this.
All You Need for this Project with Purchasing Links:
3D Printer
My 3D Printer Anycubic i3 Mega : goo.gl/rkJKiA Coupon: I3MEGA
Other cool 3D Printer Creality CR 10: goo.gl/hvgYGy Coupon: 11CR10US
Sites I purchase All Electronics and Robotic Stuff (Recommended)
Site : goo.gl/i1jHSe
1) 2 Steel pr PVC pipes (60+cm Length)
2) Geared Motor: goo.gl/UvWMjp
3) Pulley and Timing Belt: goo.gl/4s51zA
4) 3D printed Parts
5) Power Bank
6) Optional - Switch and reveres mechanism
Awesome DIY Ring Light LED
• How to Make an Awesome LED RING LIGHT...
-----------------
Music:
Song: Epic Battle and Mega Rust
TwinMusicom.org
Verm - Explode [NCS Release]
• Verm - Explode | Progressive House | ...
Follow Verm:
www.facebook.com/VermOfficial
twitter.com/WhatAmIGaming
soundcloud.com/verm
vermofficial.bandcamp.com/
-----------------
If You have any Question, Let me know in the Comment Section Below.
Can we get 1000 Likes for this Slider (and My Efforts :) ) ?!!
Subscribe for new interesting videos! goo.gl/4eNKQW
7 سال پیش
در تاریخ 1396/06/13 منتشر شده
است.
96,722
بـار بازدید شده