Reset & Program Genie Wireless Keypad-IC Black Model

Genie Wireless Keypad-IC
Genie GWK-BL Wireless Keypad

First:  Reset Wireless Keypad

Open cover half way
Press and hold (PROG) and 8 while fully opening cover
INDICATOR will blink once and go out
Close cover fully


Second: Program The Wireless Keypad

Open cover fully   (one blink and goes out)
Press 3-5-7
Press "PROG"       ( Double blinks each second )
Close cover fully

Third:  Find Learn Code Button On Door Operator Power Head

Press Learn Code Button       (binks)
Enter Pin
Press Send                    (stays on)
Press Send                    (goes out)
Press Send                    (run)
Press Send                    (stop)


Genie GWK-BL Wireless Keypad:
https://amzn.to/2yOasCc

Genie Chain Door Opener:
https://amzn.to/2PLZvrV

Genie Belt Door Opener:
https://amzn.to/2R1c0QP

Genie 3-Button Remote
https://amzn.to/2NUMrmB  

Genie 3-Button Remote 2-Pack
https://amzn.to/2OD1DC2



Disclaimers: all opinions are my own, sponsors are acknowledged. Links in the description are typically affiliate links that let you help support the channel at no extra cost.

• #entertainment
• #reset_your_garage_door_keypad_pin_number
• #resetting_and_programming_genie_keypad
• #garage_door_opener_programming_instructions
• #change_the_code_on_the_keypad_of_genie_garage_door_opener
• #program_a_garage_door_keypad
• #genie_wireless_keypad_instructions
• #reset_genie_intellicode_wireless_pin
• #reset_a_garage_door_keypad_outside
• #program_a_genie_intellicode_wireless_keypad
• #genie_openers
• #genie_openers_code_clearing
• #reset_garage_door_keypad_code_pin_remote_control