Gorilla Clear Grip

Gorilla Clear Grip is a crystal-clear contact adhesive that can be used on a variety of surfaces indoor and out. It's 100% waterproof, provides a permanent, flexible bond, and holds in just seconds. The no-run formula makes projects and repairs easy. Clear Grip is also washer and dryer safe, so you have the freedom to clean your bedazzled clothes along with all the rest! The clear, flexible glue makes it ideal for bonding metal, glass, fabric, wood, ceramic, leather, paper, and more – even photos!
Before starting your project make sure all surfaces you are working with are clean and free of dirt, grease, and oil.
Apply adhesive to each surface you are bonding. To maximize the bond strength, wait approximately 2 minutes for the adhesive to partially dry. This is important because Clear Grip gets its strength from the solvent evaporation from each side of your project. Finally, press the surfaces firmly together. Even though the glue bonds immediately, allow 24 hours for a full cure.
After you’ve finished your project, wipe the nozzle with a dry cloth and tightly replace the cap. Store it in a cool, dry place. If clean-up is necessary, wipe the uncured adhesive with a dry cloth and clean with acetone. If it’s cured, it can be scraped off the surface.

• #entertainment
• #gorilla_glue
• #contact_adhesive
• #craft_adhesive
• #craft_glue
• #diy
• #crafting
• #how_to